NSN 5306-01-386-2471
Coaxial Connector
Shall be in accordance with all requirements as specified in national aerospace standard nas 6603 through 6620.
Manufacturer part number NAS6603H44 for national stock number 5306013862471.
Datasheet
-
Product description
Shear Bolt NSN 5306-01-386-2471.
-
MPN or Model
NAS6603H44
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.345 inches -
Fastener Length
3.095 inches -
Head Style
Dished hexagon -
Head Height
0.110 inches -
Width Between Flats
Between 0.367 inches and 0.376 inches -
Grip Diameter
Between 0.186 inches and 0.190 inches -
Thread Diameter
0.190 inches -
Grip Length
2.750 inches -
Hole Quantity
3 -
Hole Type
Drilled -
Thready Qty Per Inch (tpi)
32 -
Hole Configuration Style
Hexagon corners -
Material
Steel comp e4340 -
Surface Treatment
Cadmium -
Thread Series Designator
Unjf -
Specification Data
80205-nas6603 professional/industrial association standard
More from these suppliers
- 5940-00-833-5836 MPN NAS1063A2-708Terminal Board Marker Strip
- 5905-01-008-5287 MPN NAS1379P2NWirewound Fixed Resistor Network
- 5940-01-413-3006 MPN NAS1063B112-128Terminal Board Marker Strip
- 5940-01-451-2578 MPN NAS1063C3-539DTerminal Board Marker Strip
- 5940-01-408-4280 MPN NAS1063A2-TB107CETerminal Board Marker Strip
- 5305-00-052-7450 MPN MS35198-98Machine Screw
- 5305-00-067-9844 MPN MS24693-S116Machine Screw
- 5305-00-102-4557 MPN NAS1352-7LE40PSocket Head Cap Screw
A high strength, 160,000 pounds per square inch (1100 megapascals) minimum tensile strength externally threaded fastener designed for use in applications involving great shear stress. The head is designed to accommodate an external wrench or driver. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. The unthreaded portion is of specific grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. A locking feature may be incorporated in the design of the head or threads. See bolt, machine and bolt, clevis.
Pricing and Availability
Get a quote for 5306-01-386-2471 shear boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
NAS6603H44 | National Aerospace Standards |
NAS6603H44 | National Aerospace Standards |
NAS6603H44 | National Aerospace Standards |
NAS6603H44 | National Aerospace Standards |
Stock Check
- NE: 218
- NS: 3