NSN 5306-01-386-5296
Coaxial Connector
Shall be in accordance with all requirements as specified in national aerospace standard nas 6603 through 6620.
Manufacturer part number NAS6606H31 for national stock number 5306013865296.
Datasheet
-
Product description
Shear Bolt NSN 5306-01-386-5296.
-
MPN or Model
NAS6606H31
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.578 inches -
Fastener Length
2.516 inches -
Head Style
Dished hexagon -
Head Height
0.188 inches -
Width Between Flats
Between 0.554 inches and 0.564 inches -
Grip Diameter
Between 0.374 inches and 0.375 inches -
Thread Diameter
0.375 inches -
Grip Length
1.938 inches -
Hole Quantity
3 -
Hole Type
Drilled -
Thready Qty Per Inch (tpi)
24 -
Hole Configuration Style
Hexagon corners -
Material
Steel comp e4340 -
Surface Treatment
Cadmium -
Thread Series Designator
Unjf -
Specification Data
80205-nas6606 professional/industrial association standard
More from these suppliers
- 5940-01-372-2939 MPN NAS1063D1-10Terminal Board Marker Strip
- 5940-01-451-3030 MPN NAS1063A10-105BUTerminal Board Marker Strip
- 5940-01-451-4412 MPN NAS1063A3-504AHTerminal Board Marker Strip
- 1560-01-571-8130 MPN NAS1677D29W37NAir Retaining Strap
- 5935-01-577-3543 MPN MS27488-20-2Electrical Connector End Seal Plug
- 5305-00-008-5897 MPN NAS1102E5-14Machine Screw
- 5305-00-082-6791 MPN AN525D8R11Socket Head Cap Screw
- 5305-00-141-6856 MPN NAS1635-08-44Machine Screw
A high strength, 160,000 pounds per square inch (1100 megapascals) minimum tensile strength externally threaded fastener designed for use in applications involving great shear stress. The head is designed to accommodate an external wrench or driver. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. The unthreaded portion is of specific grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. A locking feature may be incorporated in the design of the head or threads. See bolt, machine and bolt, clevis.
Pricing and Availability
Get a quote for 5306-01-386-5296 shear boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
NAS6606H31 | National Aerospace Standards |
NAS6606H31 | National Aerospace Standards |
NAS6606H31 | National Aerospace Standards |
NAS6606H31 | National Aerospace Standards |
NAS6606H31 | National Aerospace Standards |
NAS6606H31 | National Aerospace Standards |
NAS6606H31 | National Aerospace Standards |