NSN 5306-01-386-5312
Coaxial Connector
Shall be in accordance with all requirements as specified in national aerospace standard nas 6603 through 6620.
Manufacturer part number NAS6608H46 for national stock number 5306013865312.
Datasheet
-
Product description
Shear Bolt NSN 5306-01-386-5312.
-
MPN or Model
NAS6608H46
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.735 inches -
Fastener Length
3.610 inches -
Head Style
Dished hexagon -
Head Height
0.250 inches -
Width Between Flats
Between 0.741 inches and 0.752 inches -
Grip Diameter
Between 0.498 inches and 0.499 inches -
Thread Diameter
0.500 inches -
Grip Length
2.875 inches -
Hole Quantity
3 -
Hole Type
Drilled -
Thready Qty Per Inch (tpi)
20 -
Hole Configuration Style
Hexagon corners -
Material
Steel comp e4340 -
Surface Treatment
Cadmium -
Thread Series Designator
Unjf -
Specification Data
80205-nas6608 professional/industrial association standard
More from these suppliers
- 5935-01-323-4638 MPN MS33686-22-2PElectrical Connector Insert
- 5305-00-058-4015 MPN MS24694S110Machine Screw
- 5305-00-071-2223 MPN MS35199-62Machine Screw
- 5305-00-079-2824 MPN NAS1101C4-10Machine Screw
- 5305-00-082-1724 MPN MS27039-0820Machine Screw
- 5305-00-174-0619 MPN NAS200-632BC8Machine Screw
- 5305-00-177-5426 MPN NAS1181-1Close Tolerance Screw
- 5305-00-206-1290 MPN NAS517-5-6Machine Screw
A high strength, 160,000 pounds per square inch (1100 megapascals) minimum tensile strength externally threaded fastener designed for use in applications involving great shear stress. The head is designed to accommodate an external wrench or driver. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. The unthreaded portion is of specific grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. A locking feature may be incorporated in the design of the head or threads. See bolt, machine and bolt, clevis.
Pricing and Availability
Get a quote for 5306-01-386-5312 shear boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
NAS6608H46 | National Aerospace Standards |
NAS6608H46 | National Aerospace Standards |
NAS6608H46 | National Aerospace Standards |
NAS6608H46 | National Aerospace Standards |
NAS6608H46 | National Aerospace Standards |
NAS6608H46 | National Aerospace Standards |
NAS6608H46 | National Aerospace Standards |
Stock Check
- NE: 273