NSN 5306-01-387-3778
Close Tolerance Hex Head Bolt
Between 2.376 inches and 2.406 inches fastener length, spline drive shear head head style, between 0.200 inches and 0.220 inches head height, grip diameter: between 0.3735 inches and 0.3745 inches .
Manufacturer part number 03A098-6-30 for national stock number 5306013873778.
Datasheet
-
Product description
Close Tolerance Bolt NSN 5306-01-387-3778.
-
MPN or Model
03A098-6-30
-
Schedule B
7508.90.0000 (Other articles of nickel, nesoi (excluding cloth, grill & netting of nickel wire)) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.516 inches -
Fastener Length
Between 2.376 inches and 2.406 inches -
Head Style
Spline drive shear head -
Head Height
Between 0.200 inches and 0.220 inches -
Grip Diameter
Between 0.3735 inches and 0.3745 inches -
Head Minor Diameter
0.575 inches -
Thread Diameter
0.375 inches -
Grip Length
Between 1.865 inches and 1.885 inches -
Thready Qty Per Inch (tpi)
24 -
Min. Tensile Strength (psi)
125000 pounds per square inch -
Material
Nickel alloy 718 -
Material Specification
Ams 5662 assn standard single material response -
Surface Treatment
Passivate -
Surface Treatment Specification
Qq-p-35 federal specification single treatment response -
Thread Series Designator
Unjf
More from these suppliers
- 5305-01-512-8325 MPN 3M1170C5-14AFClose Tolerance Screw
- 5305-01-565-6244 MPN BACS12CK3D13Machine Screw
- 5306-01-023-9062 MPN GB511H-8-46Shear Bolt
- 5306-01-056-3192 MPN VAL22034-8G29Shear Bolt
- 5306-01-057-3042 MPN VFK101G5-012Shear Bolt
- 5306-01-117-0662 MPN VCG0001-12D44Close Tolerance Bolt
- 5306-01-406-3057 MPN VAL23033-9-28Shear Bolt
- 5306-01-463-3176 MPN VCJ0001-8D17Close Tolerance Bolt
An externally threaded fastener whose unthreaded portion is of a specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten-thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads. For items having close tolerance, and fabricated from material having 160,000 pounds per square inch (1100 megapascals) minimum tensile strength, see bolt, shear. For items fabricated from material having less than 160,000 pounds per square inch (1100 megapascals) minimum tensile strength and not having a close tolerance, see bolt, machine.
Pricing and Availability
Get a quote for 5306-01-387-3778 close tolerance boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
03A098-6-30 | Northrop Grumman Systems Corporation |
03A098 | Northrop Grumman Systems Corporation |
AIC1653-6-30 | Sps Technologies, Llc |
VCJ0001-6-30 | Valley-todeco, Inc. |
DF33003-6-30 | Huck International, Inc. |
PBF1420-6-30 | Sps Technologies, Llc |
SII1188-6-30 | Sonic Industries Inc. |
MB209-6-30 | Hi-shear Corporation |
123709-6-30 | Sps Technologies, Llc |
VS3319-6-30 | Alcoa Global Fasteners, Inc. |
MB209-6-30 | Lisi Aerospace Canada Corp |
DF33003-6-30 | Huck Intl Inc |
03A098-6-30 | Northrop Grumman Systems Corporation |