NSN 5306-01-387-3805
Close Tolerance Hex Head Bolt
Between 2.771 inches and 2.801 inches fastener length, spline drive shear head head style, between 0.247 inches and 0.267 inches head height, grip diameter: between 0.4360 inches and 0.4370 inches .
Manufacturer part number AIC1653-7-35 for national stock number 5306013873805.
Datasheet
-
Product description
Close Tolerance Bolt NSN 5306-01-387-3805.
-
MPN or Model
AIC1653-7-35
-
Schedule B
7508.90.0000 (Other articles of nickel, nesoi (excluding cloth, grill & netting of nickel wire)) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.599 inches -
Fastener Length
Between 2.771 inches and 2.801 inches -
Head Style
Spline drive shear head -
Head Height
Between 0.247 inches and 0.267 inches -
Grip Diameter
Between 0.4360 inches and 0.4370 inches -
Head Minor Diameter
0.707 inches -
Thread Diameter
0.437 inches -
Grip Length
Between 2.177 inches and 2.197 inches -
Thready Qty Per Inch (tpi)
20 -
Min. Tensile Strength (psi)
125000 pounds per square inch -
Material
Nickel alloy 718 -
Material Specification
Ams 5662 assn standard single material response -
Surface Treatment
Passivate -
Surface Treatment Specification
Qq-p-35 federal specification single treatment response -
Thread Series Designator
Unjf
More from these suppliers
- 5305-00-680-5873 MPN BACB30LU4D17Machine Screw
- 5305-01-172-0930 MPN LD111-0029-0409Close Tolerance Screw
- 5305-01-202-8325 MPN BACS12CK3U16Machine Screw
- 5305-01-509-8094 MPN 3M1170C5-6AClose Tolerance Screw
- 5305-01-604-9086 MPN 3M1277E8D28AMachine Screw
- 5306-00-357-1903 MPN VAL23029-8D45Close Tolerance Bolt
- 5306-00-411-9753 MPN GB511GF8-16Shear Bolt
- 5306-00-765-2967 MPN VAL21013-12044Shear Bolt
An externally threaded fastener whose unthreaded portion is of a specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten-thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads. For items having close tolerance, and fabricated from material having 160,000 pounds per square inch (1100 megapascals) minimum tensile strength, see bolt, shear. For items fabricated from material having less than 160,000 pounds per square inch (1100 megapascals) minimum tensile strength and not having a close tolerance, see bolt, machine.
Pricing and Availability
Get a quote for 5306-01-387-3805 close tolerance boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
AIC1653-7-35 | Sps Technologies, Llc |
DF33003-7-35 | Huck International, Inc. |
03A098-7-35 | Northrop Grumman Systems Corporation |
PBF1420-7-35 | Sps Technologies, Llc |
SII1188-7-35 | Sonic Industries Inc. |
MB209-7-35 | Hi-shear Corporation |
MB209-7-35 | Lisi Aerospace Canada Corp |
DF33003-7-35 | Huck Intl Inc |
VCJ0001-7-35 | Valley-todeco, Inc. |
123709-7-35 | Sps Technologies, Llc |
VS3319-7-35 | Alcoa Global Fasteners, Inc. |
03A098-7-35 | Northrop Grumman Systems Corporation |