NSN 5306-01-388-2299
Close Tolerance Hex Head Bolt
Chamfered undeside head 0.060 min,0.070 max in..
Manufacturer part number 1864M10P01 for national stock number 5306013882299.
Datasheet
-
Product description
Close Tolerance Bolt NSN 5306-01-388-2299.
-
MPN or Model
1864M10P01
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.1 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.680 inches -
Fastener Length
Between 1.180 inches and 1.200 inches -
Head Style
Square -
Head Height
Between 0.115 inches and 0.125 inches -
Width Between Flats
Between 0.490 inches and 0.510 inches -
Grip Diameter
Between 0.2503 inches and 0.2505 inches -
Thread Diameter
0.250 inches -
Grip Length
Between 0.500 inches and 0.520 inches -
Thready Qty Per Inch (tpi)
28 -
Material
Steel -
Material Specification
C50tf13 cl-b cagec 07482 mfr ref single material response -
Thread Series Designator
Unjf
More from these suppliers
- 1560-00-138-6709 MPN 9679M04P13Thrust Reverser Cap
- 4920-00-179-5455 MPN 1C5907G01Test Adapter
- 5905-00-256-8054 MPN 106C7451P1Precision Wire Wound Variable Resistor
- 4920-00-600-2641 MPN 1C2737Aircraft Maintenance Adapter Set
- 4920-00-630-6682 MPN 1C2513Nozzle Assemb Stand
- 4920-00-865-9290 MPN 9002M32G02Shot Peening Tool Fixture
- 4920-00-909-5504 MPN 21C1512Inlet Pressure Probe
- 4920-01-006-0005 MPN 21C4328G01Holding Fixture
An externally threaded fastener whose unthreaded portion is of a specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten-thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads. For items having close tolerance, and fabricated from material having 160,000 pounds per square inch (1100 megapascals) minimum tensile strength, see bolt, shear. For items fabricated from material having less than 160,000 pounds per square inch (1100 megapascals) minimum tensile strength and not having a close tolerance, see bolt, machine.
Pricing and Availability
Get a quote for 5306-01-388-2299 close tolerance boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
1864M10P01 | General Electric Company |
1864M10P01 | General Electric Company |
1864M10P01 | General Electric Company |
1864M10P01 | General Electric Company |
1864M10P01 | General Electric Company |
1864M10P01 | General Electric Company |
1864M10P01 | General Electric Company |
1864M10P01 | General Electric Company |
1864M10P01 | General Electric Company |
1864M10P01 | General Electric Company |
Stock Check
- NE: 72
- NS: 1