NSN 5306-01-389-9756
Wheel Bolt
Between 1.130 inches and 1.150 inches fastener length, double hexagon extended washer head style, between 0.248 inches and 0.268 inches head height, width between flats: 0.3125 inches .
Manufacturer part number 1460M71P04 for national stock number 5306013899756.
Datasheet
-
Product description
Machine Bolt NSN 5306-01-389-9756.
-
MPN or Model
1460M71P04
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.1 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.495 inches -
Fastener Length
Between 1.130 inches and 1.150 inches -
Head Style
Double hexagon extended washer -
Head Height
Between 0.248 inches and 0.268 inches -
Width Between Flats
0.3125 inches -
Extended Washer Diameter
Between 0.428 inches and 0.448 inches -
Extended Washer Thickness
Between 0.040 inches and 0.050 inches -
Thread Diameter
0.250 inches -
Thready Qty Per Inch (tpi)
28 -
Material
Steel comp 631 stand-off -
Material Specification
Ams 5678 assn standard single material response stand-off -
Thread Series Designator
Unjf
More from these suppliers
- 4920-00-076-3987 MPN 1C3718G2Aircraft Maintenance Fixture
- 4920-00-420-2552 MPN 1C5836G01Aircraft Engine Maintenance Stand
- 4920-00-570-8603 MPN 1C5014G1Test St Patternator
- 4920-00-589-1396 MPN 1C2802G3Aircraft Engine Maintenance Stand
- 4920-00-754-3766 MPN 21C945G005Aircraft Maintenance Fixture
- 5905-00-835-7448 MPN R984P1130AInductive Wire Wound Fixed Resistor
- 4920-00-865-9292 MPN 9002M32G04Shot Peening Tool Fixture
- 4920-00-908-1225 MPN 1C5040G2Oil Filtration Unit
An externally threaded fastener designed for insertion through holes in assembled parts and normally intended to be tightened or released by torquing a nut. the threaded and unthreaded portions are both of one nominal diameter of 0.190 inch (5 mm) or larger. The head is not designed to be held or driven with an inserted driver or by the thumb and fingers. a locking feature may be incorporated in the design of the head or threads. head dimensions and sizes of threaded and unthreaded portions shall conform to internationally recognized fastener standards. for items having a grip length portion machined to a tolerance of 0.0015 inch (0.038 mm) or less, bolt, shear. See also screw, cap, hexagon head and screw, machine.
![Mechanic Bill explains Wheel Bolt](/public/images/billy-thinking.png)
Pricing and Availability
Get a quote for 5306-01-389-9756 machine boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
1460M71P04 | General Electric Company |
1460M71P04 | Sps Technologies, Llc |
1460M71P02 | General Electric Company |
Stock Check
![](/public/images/partscage_shelf3.png)