NSN 5306-01-390-5135
Coaxial Connector
Between 4.109 inches and 4.156 inches fastener length, hexagon head style, between 0.359 inches and 0.391 inches head height, width between flats: between 1.052 inches and 1.065 inches .
Manufacturer part number NAS464P12-59 for national stock number 5306013905135.
Datasheet
-
Product description
Shear Bolt NSN 5306-01-390-5135.
-
MPN or Model
NAS464P12-59
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.420 inches and 0.478 inches -
Fastener Length
Between 4.109 inches and 4.156 inches -
Head Style
Hexagon -
Head Height
Between 0.359 inches and 0.391 inches -
Width Between Flats
Between 1.052 inches and 1.065 inches -
Grip Diameter
Between 0.7473 inches and 0.7480 inches -
Thread Diameter
0.750 inches -
Grip Length
Between 3.678 inches and 3.698 inches -
Thready Qty Per Inch (tpi)
16 -
Min. Tensile Strength (psi)
160000 pounds per square inch -
Material
Steel -
Thread Series Designator
Unf
More from these suppliers
- 5935-01-597-6262 MPN 007A044015-2001Electrical Connector Cover
- 5940-01-447-2950 MPN NAS1063C3-504BETerminal Board Marker Strip
- 5305-00-005-9071 MPN NAS1352-06H12PSocket Head Cap Screw
- 5305-00-058-9380 MPN MS51977-52Setscrew
- 5305-00-067-3461 MPN NAS1352C4LN12Socket Head Cap Screw
- 5305-00-071-1781 MPN MS90725-128Hexagon Head Cap Screw
- 5305-00-079-5832 MPN NAS514-632-6Machine Screw
- 5305-00-082-6785 MPN NAS1100E06-14BMachine Screw
A high strength, 160,000 pounds per square inch (1100 megapascals) minimum tensile strength externally threaded fastener designed for use in applications involving great shear stress. The head is designed to accommodate an external wrench or driver. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. The unthreaded portion is of specific grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. A locking feature may be incorporated in the design of the head or threads. See bolt, machine and bolt, clevis.
Pricing and Availability
Get a quote for 5306-01-390-5135 shear boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
NAS464P12-59 | National Aerospace Standards |