NSN 5306-01-392-1085
Coaxial Connector
0.838 inches fastener length, hexagon head style, between 0.110 inches and 0.125 inches head height, width between flats: between 0.367 inches and 0.376 inches .
Manufacturer part number NAS1303-8HW for national stock number 5306013921085.
Datasheet
-
Product description
Shear Bolt NSN 5306-01-392-1085.
-
MPN or Model
NAS1303-8HW
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.338 inches -
Fastener Length
0.838 inches -
Head Style
Hexagon -
Head Height
Between 0.110 inches and 0.125 inches -
Width Between Flats
Between 0.367 inches and 0.376 inches -
Thread Diameter
0.190 inches -
Grip Length
0.500 inches -
Thready Qty Per Inch (tpi)
32 -
Min. Tensile Strength (psi)
160000 pounds per square inch -
Hole Configuration Style
Hexagon corners -
Material
Steel -
Surface Treatment
Cadmium -
Thread Series Designator
Unjf
More from these suppliers
- 5975-00-255-2428 MPN MS3368-4-CDElectrical Components Tiedown Strap
- 5935-00-153-4395 MPN NAS1642R16-24SNElectrical Receptacle Connector
- 5305-00-080-7030 MPN NAS608-5LL16TSocket Head Cap Screw
- 5305-00-081-1737 MPN NAS514P1032-8PMachine Screw
- 5305-00-147-6175 MPN MS35214-106Machine Screw
- 5305-00-205-3674 MPN NAS1189CE06P4Socket Head Cap Screw
- 5305-00-269-4201 MPN MS24694S143Machine Screw
- 5305-00-269-4205 MPN MS24694S147Machine Screw
A high strength, 160,000 pounds per square inch (1100 megapascals) minimum tensile strength externally threaded fastener designed for use in applications involving great shear stress. The head is designed to accommodate an external wrench or driver. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. The unthreaded portion is of specific grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. A locking feature may be incorporated in the design of the head or threads. See bolt, machine and bolt, clevis.
Pricing and Availability
Get a quote for 5306-01-392-1085 shear boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
NAS1303-8HW | National Aerospace Standards |
NAS1303-8HW | National Aerospace Standards |
NAS1303-8HW | National Aerospace Standards |
NAS1303-8HW | National Aerospace Standards |
NAS1303-8HW | National Aerospace Standards |
NAS1303-8HW | National Aerospace Standards |
NAS1303-8HW | National Aerospace Standards |
NAS1303-8HW | National Aerospace Standards |
NAS1303-8HW | National Aerospace Standards |
NAS1303-8HW | National Aerospace Standards |
NAS1303-8HW | National Aerospace Standards |