NSN 5306-01-394-0825
Coaxial Connector
2.800 inches fastener length, dished hexagon head style, 0.188 inches head height, width between flats: 0.439 inches .
Manufacturer part number NAS1304-38 for national stock number 5306013940825.
Datasheet
-
Product description
Shear Bolt NSN 5306-01-394-0825.
-
MPN or Model
NAS1304-38
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.425 inches -
Fastener Length
2.800 inches -
Head Style
Dished hexagon -
Head Height
0.188 inches -
Width Between Flats
0.439 inches -
Grip Diameter
0.250 inches -
Thread Diameter
0.250 inches -
Grip Length
2.385 inches -
Thready Qty Per Inch (tpi)
28 -
Min. Tensile Strength (psi)
160000 pounds per square inch -
Material
Steel -
Surface Treatment
Cadmium -
Thread Series Designator
Unjf
More from these suppliers
- 5935-01-063-4525 MPN NAS1668-1Electrical Connector End Seal Plug
- 5940-01-381-7272 MPN NAS1063B168-179Terminal Board Marker Strip
- 5940-01-384-3964 MPN NAS1063C5TB177BTerminal Board Marker Strip
- 5940-01-384-3892 MPN NAS1063A8TB98TTerminal Board Marker Strip
- 5305-00-005-0656 MPN NAS1152V4Close Tolerance Screw
- 5305-00-006-8306 MPN NAS1100E06-4PMachine Screw
- 5305-00-053-1111 MPN MS24621-7Tapping Screw
- 5305-00-058-9364 MPN MS51977-21Setscrew
A high strength, 160,000 pounds per square inch (1100 megapascals) minimum tensile strength externally threaded fastener designed for use in applications involving great shear stress. The head is designed to accommodate an external wrench or driver. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. The unthreaded portion is of specific grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. A locking feature may be incorporated in the design of the head or threads. See bolt, machine and bolt, clevis.
Pricing and Availability
Get a quote for 5306-01-394-0825 shear boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
NAS1304-38 | National Aerospace Standards |
Z00.N5103572338 | Socata |