NSN 5306-01-394-2405
Coaxial Connector
Threads per mil-s-8879 except max. Dia. Shall be a min. Of 0.001 in. Less than the measured shank dia..
Manufacturer part number AIC1203-5-14 for national stock number 5306013942405.
Datasheet
-
Product description
Shear Bolt NSN 5306-01-394-2405.
-
MPN or Model
AIC1203-5-14
-
Schedule B
7508.90.0000 (Other articles of nickel, nesoi (excluding cloth, grill & netting of nickel wire)) -
NMF (National Motor Freight)
093490 - Bolt/nut/screw/clips/fastener/etc -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.950 inches -
Fastener Length
1.825 inches -
Head Style
Spline extended washer -
Head Height
Between 0.302 inches and 0.322 inches -
Extended Washer Diameter
Between 0.575 inches and 0.585 inches -
Extended Washer Thickness
Between 0.035 inches and 0.055 inches -
Grip Diameter
Between 0.311 inches and 0.312 inches -
Head Minor Diameter
Between 0.383 inches and 0.389 inches -
Thread Diameter
0.312 inches -
Grip Length
0.875 inches -
Thready Qty Per Inch (tpi)
24 -
Min. Tensile Strength (psi)
180000 pounds per square inch -
Surface Finish
32.0 microinches grip -
Material
Nickel alloy 718 -
Material Specification
Ams 5662 assn standard single material response -
Surface Treatment
Passivate -
Surface Treatment Specification
Qq-p-35 federal specification single treatment response -
Thread Series Designator
Unjf
More from these suppliers
- 5305-00-001-8184 MPN 3MA334FA20Close Tolerance Screw
- 5305-00-316-8140 MPN ST3M455-3L3-1Close Tolerance Screw
- 5305-00-558-4540 MPN 965399-467Machine Screw
- 5305-00-725-5918 MPN AIC813-4-R31Machine Screw
- 5305-01-004-9520 MPN 965817-107CSocket Head Cap Screw
- 5305-01-004-9520 MPN AIC817-08-107CSocket Head Cap Screw
- 5305-01-053-5802 MPN AIC985-5D4PClose Tolerance Screw
- 5305-01-054-6234 MPN AIC9535-6-15Close Tolerance Screw
A high strength, 160,000 pounds per square inch (1100 megapascals) minimum tensile strength externally threaded fastener designed for use in applications involving great shear stress. The head is designed to accommodate an external wrench or driver. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. The unthreaded portion is of specific grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. A locking feature may be incorporated in the design of the head or threads. See bolt, machine and bolt, clevis.
Pricing and Availability
Get a quote for 5306-01-394-2405 shear boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
AIC1203-5-14 | Sps Technologies, Llc |
3D0196-5 | Boeing Company, The |
92363-5-14 | Sps Technologies, Llc |