NSN 5306-01-394-7863
Close Tolerance Hex Head Bolt
Between 4.762 inches and 4.890 inches fastener length, crowned hexagon head style, between 0.376 inches and 0.391 inches head height, width between flats: between 1.052 inches and 1.064 inches .
Manufacturer part number MS27576-12-60 for national stock number 5306013947863.
Datasheet
-
Product description
Close Tolerance Bolt NSN 5306-01-394-7863.
-
MPN or Model
MS27576-12-60
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 1.012 inches and 1.124 inches -
Fastener Length
Between 4.762 inches and 4.890 inches -
Head Style
Crowned hexagon -
Head Height
Between 0.376 inches and 0.391 inches -
Width Between Flats
Between 1.052 inches and 1.064 inches -
Locking Feature
Retainer fastener -
Grip Diameter
Between 0.7482 inches and 0.7491 inches -
Shank Unthreaded Hole Diameter
0.7482 inches first hole and 0.7491 inches first hole -
Thread Diameter
0.750 inches -
Grip Length
Between 4.762 inches and 4.782 inches -
Features Provided
Cotter pin -
Thready Qty Per Inch (tpi)
16 -
Min. Tensile Strength (psi)
95000 pounds per square inch -
Hardness Rating
36.0 rockwell c fastener and 41.0 rockwell c fastener -
Distance From Head Largest Bearing Surface To Shank Hole Center
4.615 inches first hole and 4.733 inches first hole -
Surface Finish
63.0 microinches grip -
Material
Steel comp e4340 or steel comp 4140 or steel comp 8740 or steel comp 4130 or steel comp 6150 -
Surface Treatment
Cadmium and chromate -
Surface Treatment Specification
Qq-p-416, ty2, cl2 federal specification single treatment response -
Thread Series Designator
Unjf
More from these suppliers
- 1680-00-226-0555 MPN NAS303-25-5133Arrestin Cable Assy
- 5940-01-451-4408 MPN NAS1063A10-105BXTerminal Board Marker Strip
- 5940-01-447-2950 MPN NAS1063C3-504BETerminal Board Marker Strip
- 5305-00-006-6655 MPN NAS1018-54AHexagon Head Cap Screw
- 5305-00-016-8193 MPN MS27039-1-42Machine Screw
- 5305-00-053-1117 MPN MS24621-16Tapping Screw
- 5305-00-056-7984 MPN AN565D1032H9Setscrew
- 5305-00-068-1655 MPN NASM51045-20Setscrew
An externally threaded fastener whose unthreaded portion is of a specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten-thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads. For items having close tolerance, and fabricated from material having 160,000 pounds per square inch (1100 megapascals) minimum tensile strength, see bolt, shear. For items fabricated from material having less than 160,000 pounds per square inch (1100 megapascals) minimum tensile strength and not having a close tolerance, see bolt, machine.
Pricing and Availability
Get a quote for 5306-01-394-7863 close tolerance boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
MS27576-12-60 | National Aerospace Standards |
MS27576-12-60 | Military Standards |