NSN 5306-01-394-7892
Coaxial Connector
Between 1.669 inches and 1.716 inches fastener length, double hexagon head style, between 0.200 inches and 0.220 inches head height, width between flats: between 0.553 inches and 0.564 inches .
Manufacturer part number PBF1479-6-19A for national stock number 5306013947892.
Datasheet
-
Product description
Shear Bolt NSN 5306-01-394-7892.
-
MPN or Model
PBF1479-6-19A
-
Schedule B
7508.90.0000 (Other articles of nickel, nesoi (excluding cloth, grill & netting of nickel wire)) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.1 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.497 inches -
Fastener Length
Between 1.669 inches and 1.716 inches -
Head Style
Double hexagon -
Head Height
Between 0.200 inches and 0.220 inches -
Width Between Flats
Between 0.553 inches and 0.564 inches -
Grip Diameter
Between 0.3740 inches and 0.3745 inches -
Thread Diameter
0.375 inches -
Grip Length
1.188 inches -
Thready Qty Per Inch (tpi)
24 -
Min. Tensile Strength (psi)
17100 pounds per square inch -
Material
Nickel alloy 718 -
Material Specification
Ams 5662 assn standard single material response -
Surface Treatment
Passivate -
Surface Treatment Specification
Qq-p-35 federal specification single treatment response -
Thread Series Designator
Unjf
More from these suppliers
- 5305-01-025-6960 MPN ST3M714-4D11Close Tolerance Screw
- 5305-01-054-4637 MPN BACB30LK3-3Close Tolerance Screw
- 5305-01-285-2753 MPN 3M927-4L20Close Tolerance Screw
- 5305-01-349-4193 MPN VCL0009-5-14Close Tolerance Screw
- 5305-01-512-8416 MPN 3M1170C3-9AFClose Tolerance Screw
- 5306-00-508-6903 MPN VAL23611-12DS36Close Tolerance Bolt
- 5306-01-046-1189 MPN VAL23608-5-11Shoulder Bolt
- 5306-01-054-3419 MPN VCG0009L6-13Shear Bolt
A high strength, 160,000 pounds per square inch (1100 megapascals) minimum tensile strength externally threaded fastener designed for use in applications involving great shear stress. The head is designed to accommodate an external wrench or driver. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. The unthreaded portion is of specific grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. A locking feature may be incorporated in the design of the head or threads. See bolt, machine and bolt, clevis.
Pricing and Availability
Get a quote for 5306-01-394-7892 shear boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
PBF1479-6-19A | Sps Technologies, Llc |
GB511GG6-19A | Valley-todeco, Inc. |
GB511GG6-19A | Sps Technologies, Llc |
GB511GG6-19A | Northrop Grumman Systems Corporation |