NSN 5306-01-395-1235
Coaxial Connector
Between 4.606 inches and 4.636 inches fastener length, spline extended washer head style, between 0.590 inches and 0.610 inches head height, extended washer diameter: between 1.384 inches and 1.394 inches .
Manufacturer part number MS21296-12053 for national stock number 5306013951235.
Datasheet
-
Product description
Shear Bolt NSN 5306-01-395-1235.
-
MPN or Model
MS21296-12053
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
1.293 inches -
Fastener Length
Between 4.606 inches and 4.636 inches -
Head Style
Spline extended washer -
Head Height
Between 0.590 inches and 0.610 inches -
Extended Washer Diameter
Between 1.384 inches and 1.394 inches -
Extended Washer Thickness
Between 0.098 inches and 0.118 inches -
Grip Diameter
Between 0.7480 inches and 0.7490 inches -
Head Minor Diameter
Between 0.797 inches and 0.812 inches -
End Application
Pacer dawn -
Thread Diameter
0.750 inches -
Grip Length
Between 3.302 inches and 3.322 inches -
Thready Qty Per Inch (tpi)
16 -
Min. Tensile Strength (psi)
103000 pounds per square inch -
Hardness Rating
51.0 rockwell c and 54.0 rockwell c -
Material
Steel comp h11 -
Material Specification
Ams 6487 assn standard single material response -
Surface Treatment
Cadmium -
Surface Treatment Specification
Mil-c-8837, type ii, class 2 military specification single treatment response -
Thread Series Designator
Unjf
More from these suppliers
- 5305-00-005-0655 MPN NAS1151E3Close Tolerance Screw
- 5305-00-006-2410 MPN NASM51105Hexagon Head Cap Screw
- 5305-00-051-4495 MPN MS51973-17Setscrew
- 5305-00-144-0357 MPN NAS1503-15Close Tolerance Screw
- 5305-00-269-2813 MPN MS90726-69Hexagon Head Cap Screw
- 5305-00-282-8478 MPN NAS335P25Machine Screw
- 5305-00-340-4696 MPN NAS1102E08-5Machine Screw
- 5305-00-367-4987 MPN NAS589-15TClose Tolerance Screw
A high strength, 160,000 pounds per square inch (1100 megapascals) minimum tensile strength externally threaded fastener designed for use in applications involving great shear stress. The head is designed to accommodate an external wrench or driver. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. The unthreaded portion is of specific grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. A locking feature may be incorporated in the design of the head or threads. See bolt, machine and bolt, clevis.
Pricing and Availability
Get a quote for 5306-01-395-1235 shear boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
MS21296-12053 | National Aerospace Standards |
MS21296-12053 | Military Standards |