NSN 5306-01-395-1236
Coaxial Connector
Between 4.731 inches and 4.761 inches fastener length, spline extended washer head style, between 0.590 inches and 0.610 inches head height, extended washer diameter: between 1.384 inches and 1.394 inches .
Manufacturer part number MS21296-12055 for national stock number 5306013951236.
Datasheet
-
Product description
Shear Bolt NSN 5306-01-395-1236.
-
MPN or Model
MS21296-12055
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
1.293 inches -
Fastener Length
Between 4.731 inches and 4.761 inches -
Head Style
Spline extended washer -
Head Height
Between 0.590 inches and 0.610 inches -
Extended Washer Diameter
Between 1.384 inches and 1.394 inches -
Extended Washer Thickness
Between 0.098 inches and 0.118 inches -
Grip Diameter
Between 0.7480 inches and 0.7490 inches -
Head Minor Diameter
Between 0.797 inches and 0.812 inches -
End Application
Pacer dawn -
Thread Diameter
0.750 inches -
Grip Length
Between 3.428 inches and 3.448 inches -
Thready Qty Per Inch (tpi)
16 -
Min. Tensile Strength (psi)
103000 pounds per square inch -
Hardness Rating
51.0 rockwell c and 54.0 rockwell c -
Material
Steel comp h11 -
Material Specification
Ams 6487 assn standard single material response -
Surface Treatment
Cadmium -
Surface Treatment Specification
Mil-c-8837, type ii, class2 military specification single treatment response -
Thread Series Designator
Unjf
More from these suppliers
- 5305-00-052-9571 MPN NAS1351C04H4Socket Head Cap Screw
- 5305-00-063-9645 MPN NAS1096-2-14Machine Screw
- 5305-00-082-6739 MPN MS51959-111Machine Screw
- 5305-00-160-9515 MPN MS24693-S66Machine Screw
- 5305-00-162-4077 MPN NAS1352-3-10Socket Head Cap Screw
- 5305-00-225-7775 MPN MS16996-25Socket Head Cap Screw
- 5305-00-269-4223 MPN MS24694S165Machine Screw
- 5305-00-409-2156 MPN NAS1352C04LN6Socket Head Cap Screw
A high strength, 160,000 pounds per square inch (1100 megapascals) minimum tensile strength externally threaded fastener designed for use in applications involving great shear stress. The head is designed to accommodate an external wrench or driver. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. The unthreaded portion is of specific grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. A locking feature may be incorporated in the design of the head or threads. See bolt, machine and bolt, clevis.
Pricing and Availability
Get a quote for 5306-01-395-1236 shear boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
MS21296-12055 | National Aerospace Standards |
MS21296-12055 | Military Standards |