NSN 5306-01-395-1985
Coaxial Connector
0.907 inches fastener length, dished hexagon head style, 0.191 inches head height, width between flats: 0.502 inches .
Manufacturer part number NAS1305-7 for national stock number 5306013951985.
Datasheet
-
Product description
Shear Bolt NSN 5306-01-395-1985.
-
MPN or Model
NAS1305-7
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.1 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.469 inches -
Fastener Length
0.907 inches -
Head Style
Dished hexagon -
Head Height
0.191 inches -
Width Between Flats
0.502 inches -
Grip Diameter
0.312 inches -
Thread Diameter
0.312 inches -
Thready Qty Per Inch (tpi)
24 -
Material
Steel -
Surface Treatment
Cadmium -
Thread Series Designator
Unjf
More from these suppliers
- 1680-00-397-5197 MPN NAS162Control Wheel H Cap
- 5940-01-058-8888 MPN NAS1744-5Conductor Splice
- 5305-00-008-5910 MPN NAS1189E3T10Socket Head Cap Screw
- 5305-00-070-3118 MPN NAS1633E6Machine Screw
- 5305-00-079-7986 MPN MS24694S204Machine Screw
- 5305-00-115-9965 MPN MS16996-1BSocket Head Cap Screw
- 5305-00-151-2026 MPN MILS7839Machine Screw
- 5305-00-167-3668 MPN AN525-8-32Machine Screw
A high strength, 160,000 pounds per square inch (1100 megapascals) minimum tensile strength externally threaded fastener designed for use in applications involving great shear stress. The head is designed to accommodate an external wrench or driver. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. The unthreaded portion is of specific grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. A locking feature may be incorporated in the design of the head or threads. See bolt, machine and bolt, clevis.
Pricing and Availability
Get a quote for 5306-01-395-1985 shear boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
NAS1305-7 | National Aerospace Standards |
Z00.N5103572407 | Socata |