NSN 5306-01-395-6156
Coaxial Connector
3.294 inches fastener length, double hexagon w/hole head style, 0.618 inches head height, extended washer diameter: between 1.040 inches and 1.050 inches .
Manufacturer part number MS21250H10038 for national stock number 5306013956156.
Datasheet
-
Product description
Shear Bolt NSN 5306-01-395-6156.
-
MPN or Model
MS21250H10038
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Thread Class
3a -
Thread Direction
Right-hand -
Fastener Length
3.294 inches -
Head Style
Double hexagon w/hole -
Head Height
0.618 inches -
Extended Washer Diameter
Between 1.040 inches and 1.050 inches -
Grip Diameter
0.624 inches -
Thread Diameter
0.625 inches -
Grip Length
2.273 inches -
Thready Qty Per Inch (tpi)
18 -
Material
Steel comp 4140 -
Surface Treatment
Cadmium -
Thread Series Designator
Unjf
More from these suppliers
- 5940-00-082-4665 MPN MS27249-1ESTerminal Board
- 5940-00-113-3142 MPN MS20659-139Lug Terminal
- 5905-00-141-0596 MPN MS35043-23Composition Fixed Resistor
- 5935-00-172-8228 MPN MS24264G22T55S10Electrical Receptacle Connector
- 5935-00-192-1340 MPN MS3108B16-9PElectrical Plug Connector
- 5935-00-204-6731 MPN MS3102E20-17PElectrical Receptacle Connector
- 5935-00-209-0431 MPN MS3474L24-31PWElectrical Receptacle Connector
- 5935-00-258-0478 MPN MS3102A36-10PXElectrical Receptacle Connector
A high strength, 160,000 pounds per square inch (1100 megapascals) minimum tensile strength externally threaded fastener designed for use in applications involving great shear stress. The head is designed to accommodate an external wrench or driver. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. The unthreaded portion is of specific grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. A locking feature may be incorporated in the design of the head or threads. See bolt, machine and bolt, clevis.
Pricing and Availability
Get a quote for 5306-01-395-6156 shear boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
MS21250H10038 | Military Standards |