NSN 5306-01-396-0075
Wheel Bolt
Between 2.187 inches and 2.234 inches fastener length, hexagon head style, between 0.203 inches and 0.235 inches head height, width between flats: between 0.553 inches and 0.565 inches .
Manufacturer part number AN6CH21A for national stock number 5306013960075.
Datasheet
-
Product description
Machine Bolt NSN 5306-01-396-0075.
-
MPN or Model
AN6CH21A
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.609 inches and 0.688 inches -
Fastener Length
Between 2.187 inches and 2.234 inches -
Head Style
Hexagon -
Head Height
Between 0.203 inches and 0.235 inches -
Width Between Flats
Between 0.553 inches and 0.565 inches -
Hole Diameter
Between 0.070 inches and 0.080 inches -
Thread Diameter
0.375 inches -
Grip Length
Between 1.546 inches and 1.578 inches -
Hole Quantity
1 -
Hole Type
Drilled -
Features Provided
Finished head -
Thready Qty Per Inch (tpi)
24 -
Min. Tensile Strength (psi)
125000 pounds per square inch -
Hardness Rating
26.0 rockwell c and 32.0 rockwell c -
Hole Configuration Style
Hexagon flats -
Material
Steel comp 431 -
Material Specification
Mil-s-18732 military specification single material response -
Surface Treatment
Passivate -
Thread Series Designator
Unf
More from these suppliers
- 5935-00-222-7818 MPN AN3106B32-13PElectrical Plug Connector
- 4820-00-529-5494 MPN AN6279-4CDSafety Relief Valve
- 5935-00-552-6001 MPN AN3108B16S8SElectrical Plug Connector
- 5935-01-160-6993 MPN AN3106A24-20PElectrical Plug Connector
- 5935-01-181-6590 MPN AN3106A28-15PXElectrical Plug Connector
- 5305-00-009-7667 MPN AN520C1R2Machine Screw
- 5305-00-149-0959 MPN AN510-6R12Machine Screw
- 5305-00-151-3245 MPN AN507Machine Screw
An externally threaded fastener designed for insertion through holes in assembled parts and normally intended to be tightened or released by torquing a nut. the threaded and unthreaded portions are both of one nominal diameter of 0.190 inch (5 mm) or larger. The head is not designed to be held or driven with an inserted driver or by the thumb and fingers. a locking feature may be incorporated in the design of the head or threads. head dimensions and sizes of threaded and unthreaded portions shall conform to internationally recognized fastener standards. for items having a grip length portion machined to a tolerance of 0.0015 inch (0.038 mm) or less, bolt, shear. See also screw, cap, hexagon head and screw, machine.
Pricing and Availability
Get a quote for 5306-01-396-0075 machine boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
AN6CH21A | Aeronautical Standards Group |
AN6CH21A | Aeronautical Standards Group |