NSN 5306-01-397-6700
Coaxial Connector
Drilled head.
Manufacturer part number NAS1304-6H for national stock number 5306013976700.
Datasheet
-
Product description
Shear Bolt NSN 5306-01-397-6700.
-
MPN or Model
NAS1304-6H
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.1 lb -
Thread Class
3a -
Fastener Length
0.800 inches -
Head Style
Hexagon -
Head Height
0.125 inches -
Width Between Flats
Between 0.439 inches and 0.490 inches -
Thread Diameter
0.250 inches -
Grip Length
0.375 inches -
Thready Qty Per Inch (tpi)
28 -
Material
Steel -
Surface Treatment
Cadmium -
Thread Series Designator
Unjf
More from these suppliers
- 5940-01-425-7387 MPN NAS1063C8-319Terminal Board Marker Strip
- 1560-01-423-0213 MPN NAS6708D38Aircraft Structural Component Support
- 5305-00-008-5896 MPN NAS1102E5-10Machine Screw
- 5305-00-009-0517 MPN NAS1393E00-7Machine Screw
- 5305-00-021-7334 MPN MS21295-37Socket Head Cap Screw
- 5305-00-053-0614 MPN NAS1100C04-14Machine Screw
- 5305-00-057-0534 MPN MS51958-50Machine Screw
- 5305-00-068-1653 MPN MS51031-7Setscrew
A high strength, 160,000 pounds per square inch (1100 megapascals) minimum tensile strength externally threaded fastener designed for use in applications involving great shear stress. The head is designed to accommodate an external wrench or driver. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. The unthreaded portion is of specific grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. A locking feature may be incorporated in the design of the head or threads. See bolt, machine and bolt, clevis.
Pricing and Availability
Get a quote for 5306-01-397-6700 shear boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
NAS1304-6H | National Aerospace Standards |