NSN 5306-01-406-1335
Coaxial Connector
Drilled head.
Manufacturer part number NAS6205-26H for national stock number 5306014061335.
Datasheet
-
Product description
Shear Bolt NSN 5306-01-406-1335.
-
MPN or Model
NAS6205-26H
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.438 inches -
Fastener Length
2.063 inches -
Head Style
Dished hexagon -
Head Height
Between 0.156 inches and 0.171 inches -
Width Between Flats
Between 0.492 inches and 0.502 inches -
Grip Diameter
0.312 inches -
Thread Diameter
0.312 inches -
Grip Length
1.625 inches -
Thready Qty Per Inch (tpi)
24 -
Min. Tensile Strength (psi)
160000 pounds per square inch -
Material
Steel -
Surface Treatment
Cadmium -
Thread Series Designator
Unjf -
Specification Data
80205-nas6205 government standard
More from these suppliers
- 5940-00-827-6553 MPN NAS1063A9-1Terminal Board Marker Strip
- 5940-01-417-7501 MPN NAS1063B1-11Terminal Board Marker Strip
- 5940-01-455-3510 MPN NAS1063A4-138AKTerminal Board Marker Strip
- 5940-00-827-0772 MPN NAS1063A6-1Terminal Board Marker Strip
- 5305-00-005-0655 MPN NAS1151E3Close Tolerance Screw
- 5305-00-006-6655 MPN NAS1018-54AHexagon Head Cap Screw
- 5305-00-052-6944 MPN NAS1219-3-14PMachine Screw
- 5305-00-053-8078 MPN MS24677-105Socket Head Cap Screw
A high strength, 160,000 pounds per square inch (1100 megapascals) minimum tensile strength externally threaded fastener designed for use in applications involving great shear stress. The head is designed to accommodate an external wrench or driver. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. The unthreaded portion is of specific grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. A locking feature may be incorporated in the design of the head or threads. See bolt, machine and bolt, clevis.
Pricing and Availability
Get a quote for 5306-01-406-1335 shear boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
NAS6205-26H | National Aerospace Standards |