NSN 5306-01-406-8318
Close Tolerance Hex Head Bolt
Between 3.022 inches and 3.042 inches fastener length, hexagon head style, between 0.128 inches and 0.141 inches head height, width between flats: between 0.430 inches and 0.439 inches .
Manufacturer part number 121673-4-42 for national stock number 5306014068318.
Datasheet
-
Product description
Close Tolerance Bolt NSN 5306-01-406-8318.
-
MPN or Model
121673-4-42
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.1 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.308 inches and 0.323 inches -
Fastener Length
Between 3.022 inches and 3.042 inches -
Head Style
Hexagon -
Head Height
Between 0.128 inches and 0.141 inches -
Width Between Flats
Between 0.430 inches and 0.439 inches -
Locking Feature
Slotted ring -
Grip Diameter
Between 0.2483 inches and 0.2492 inches -
End Application
F-15s -
Thread Diameter
0.250 inches -
Grip Length
Between 2.604 inches and 2.620 inches -
Thready Qty Per Inch (tpi)
28 -
Hardness Rating
36.0 rockwell c and 41.0 rockwell c -
Material
Steel -
Material Specification
Ams5643 assn standard 1st material response ring or ams5673 assn standard 2nd material response ring -
Surface Treatment
Passivate ring -
Surface Treatment Specification
Qq-p-416, type 2, class 2 federal specification single treatment response -
Thread Series Designator
Unjf
More from these suppliers
- 1560-00-075-0921 MPN 32-87270-7Aircraft Access Cover
- 1560-00-140-6590 MPN 32-32102-31Aircraft Beam
- 1560-00-145-5852 MPN 32-35215-10Aircraft Tee
- 5985-00-168-7849 MPN 5M2437-001Electrical Dummy Load
- 1560-00-249-7990 MPN 68A325500-2005Aircraft Skin
- 1560-00-259-3444 MPN 68A731230-2003Pylon Hook
- 4820-00-294-1565 MPN 7M848-2Restrictor Check Valve
- 5930-00-324-3222 MPN 68-580120-101Pressure Switch
An externally threaded fastener whose unthreaded portion is of a specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten-thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads. For items having close tolerance, and fabricated from material having 160,000 pounds per square inch (1100 megapascals) minimum tensile strength, see bolt, shear. For items fabricated from material having less than 160,000 pounds per square inch (1100 megapascals) minimum tensile strength and not having a close tolerance, see bolt, machine.
Pricing and Availability
Get a quote for 5306-01-406-8318 close tolerance boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
121673-4-42 | Sps Technologies, Llc |
ST3M735-4-42 | Boeing Company, The |