NSN 5306-01-407-6353
Coaxial Connector
Between 3.765 inches and 3.812 inches fastener length, hexagon head style, between 0.234 inches and 0.266 inches head height, width between flats: between 0.740 inches and 0.752 inches .
Manufacturer part number NAS464P8L53 for national stock number 5306014076353.
Datasheet
-
Product description
Shear Bolt NSN 5306-01-407-6353.
-
MPN or Model
NAS464P8L53
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.444 inches and 0.511 inches -
Fastener Length
Between 3.765 inches and 3.812 inches -
Head Style
Hexagon -
Head Height
Between 0.234 inches and 0.266 inches -
Width Between Flats
Between 0.740 inches and 0.752 inches -
Grip Diameter
Between 0.4986 inches and 0.4991 inches -
Thread Diameter
0.500 inches -
Grip Length
Between 3.296 inches and 3.812 inches -
Thready Qty Per Inch (tpi)
20 -
Min. Tensile Strength (psi)
160000 pounds per square inch -
Hardness Rating
36.0 rockwell c and 40.0 rockwell c -
Surface Finish
32.0 microinches grip -
Material
Steel -
Thread Series Designator
Unjf
More from these suppliers
- 5940-01-394-5134 MPN NAS707S1Stud Terminal
- 5305-00-008-5914 MPN NAS1100E06-28Machine Screw
- 5305-00-023-0053 MPN NAS560HK3-26Machine Screw
- 5305-00-057-0503 MPN MS51958-6Machine Screw
- 5305-00-115-9526 MPN MS90725-58Hexagon Head Cap Screw
- 5305-00-138-4367 MPN NAS2805-12Close Tolerance Screw
- 5305-00-151-2722 MPN MILS7839Machine Screw
- 5305-00-225-6201 MPN MS24694A103Machine Screw
A high strength, 160,000 pounds per square inch (1100 megapascals) minimum tensile strength externally threaded fastener designed for use in applications involving great shear stress. The head is designed to accommodate an external wrench or driver. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. The unthreaded portion is of specific grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. A locking feature may be incorporated in the design of the head or threads. See bolt, machine and bolt, clevis.
Pricing and Availability
Get a quote for 5306-01-407-6353 shear boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
NAS464P8L53 | National Aerospace Standards |