NSN 5306-01-410-8547
Coaxial Connector
3.183 inches fastener length, hexagon head style, between 0.125 inches and 0.140 inches head height, width between flats: between 0.2490 inches and 0.2495 inches .
Manufacturer part number NAS6304U45D for national stock number 5306014108547.
Datasheet
-
Product description
Shear Bolt NSN 5306-01-410-8547.
-
MPN or Model
NAS6304U45D
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.370 inches -
Fastener Length
3.183 inches -
Head Style
Hexagon -
Head Height
Between 0.125 inches and 0.140 inches -
Width Between Flats
Between 0.2490 inches and 0.2495 inches -
Grip Diameter
Between 0.2490 inches and 0.2495 inches -
Thread Diameter
0.250 inches -
Grip Length
2.813 inches -
Thready Qty Per Inch (tpi)
28 -
Min. Tensile Strength (psi)
160000 pounds per square inch -
Material
Iron alloy 660 -
Material Specification
Ams5731 assn standard single material response or ams5737 assn standard single material response -
Thread Series Designator
Unjf
More from these suppliers
- 4920-01-536-8668 MPN NAS1213R10J84Airc Strap Assembly
- 1560-01-423-0218 MPN NAS6808D39Aircraft Structural Component Support
- 5305-00-063-7358 MPN NAS601-9BMachine Screw
- 5305-00-078-9820 MPN NAS517-3-39Machine Screw
- 5305-00-081-2651 MPN MS51038-15Setscrew
- 5305-00-151-5793 MPN NAS1133-9Close Tolerance Screw
- 5305-00-206-5280 MPN MS24694S289Machine Screw
- 5305-00-243-8319 MPN NAS1101E4-6Machine Screw
A high strength, 160,000 pounds per square inch (1100 megapascals) minimum tensile strength externally threaded fastener designed for use in applications involving great shear stress. The head is designed to accommodate an external wrench or driver. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. The unthreaded portion is of specific grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. A locking feature may be incorporated in the design of the head or threads. See bolt, machine and bolt, clevis.
Pricing and Availability
Get a quote for 5306-01-410-8547 shear boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
NAS6304U45D | National Aerospace Standards |
NAS6304U45D | National Aerospace Standards |
NAS6304U45D | National Aerospace Standards |