NSN 5306-01-412-0513
Coaxial Connector
2.310 inches fastener length, spline drive shear head head style, between 0.378 inches and 0.398 inches head height, grip diameter: between 0.3735 inches and 0.3745 inches .
Manufacturer part number 77711-6H28 for national stock number 5306014120513.
Datasheet
-
Product description
Shear Bolt NSN 5306-01-412-0513.
-
MPN or Model
77711-6H28
-
Schedule B
7508.90.0000 (Other articles of nickel, nesoi (excluding cloth, grill & netting of nickel wire)) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.1 lb -
Thread Class
Aal -
Thread Direction
Right-hand -
Thread Length
0.560 inches -
Fastener Length
2.310 inches -
Head Style
Spline drive shear head -
Head Height
Between 0.378 inches and 0.398 inches -
Grip Diameter
Between 0.3735 inches and 0.3745 inches -
Head Minor Diameter
Between 0.378 inches and 0.398 inches -
Thread Diameter
0.375 inches -
Grip Length
1.750 inches -
Thready Qty Per Inch (tpi)
24 -
Min. Tensile Strength (psi)
125000 pounds per square inch -
Material
Nickel alloy 718 -
Surface Treatment
Passivate -
Surface Treatment Specification
Qq-p-35 federal specification single treatment response -
Thread Series Designator
Unjf
More from these suppliers
- 5305-00-067-7811 MPN SFH22-6A18Machine Screw
- 5305-00-357-1878 MPN HT4028L4-9Close Tolerance Screw
- 5305-00-449-2433 MPN NAS1102-04-12Machine Screw
- 5305-00-505-3458 MPN LS15237C4-4Close Tolerance Screw
- 5305-00-541-9067 MPN NAS1189E08P7LSocket Head Cap Screw
- 5305-00-721-3133 MPN NAS1204-27DClose Tolerance Screw
- 5305-00-754-3058 MPN NAS1203-10Close Tolerance Screw
- 5305-00-915-4767 MPN C792-4-3Machine Screw
A high strength, 160,000 pounds per square inch (1100 megapascals) minimum tensile strength externally threaded fastener designed for use in applications involving great shear stress. The head is designed to accommodate an external wrench or driver. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. The unthreaded portion is of specific grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. A locking feature may be incorporated in the design of the head or threads. See bolt, machine and bolt, clevis.
Pricing and Availability
Get a quote for 5306-01-412-0513 shear boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
77711-6H28 | Sps Technologies, Llc |
77711-6H28 | Sps Technologies, Llc |
77711-6H28 | Sps Technologies, Llc |
77711-6H28 | Sps Technologies, Llc |
77711-6H28 | Sps Technologies, Llc |