NSN 5306-01-412-9046
Close Tolerance Hex Head Bolt
1.062 inches fastener length, hexagon head style, 0.094 inches head height, width between flats: between 0.430 inches and 0.439 inches .
Manufacturer part number ST3M735C4-17 for national stock number 5306014129046.
Datasheet
-
Product description
Close Tolerance Bolt NSN 5306-01-412-9046.
-
MPN or Model
ST3M735C4-17
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
Thread Class
3a -
Thread Direction
Right-hand -
Fastener Length
1.062 inches -
Head Style
Hexagon -
Head Height
0.094 inches -
Width Between Flats
Between 0.430 inches and 0.439 inches -
End Application
F-15 acft -
Thread Diameter
0.250 inches -
Thready Qty Per Inch (tpi)
28 -
Material
Iron alloy 660 -
Thread Series Designator
Unjf
More from these suppliers
- 1560-00-004-3730 MPN 32-33002-767Aircraft Skin
- 1680-00-005-3736 MPN 53G970701-20Bell Crank
- 1560-00-135-1619 MPN 53-31250-1Radome Blanket
- 1560-00-137-5231 MPN 32-11055-76Trailing Edge Rib Assembly
- 1680-00-164-6729 MPN 53-64011-2Control Pedal
- 1560-00-180-0687 MPN 32-58391-307Fuel Cell Panel
- 1560-00-249-8813 MPN 68A327152-2004Actuator Support Beam
- 5950-00-341-1052 MPN ST5M1318-002Power Autotransformer Transformer
An externally threaded fastener whose unthreaded portion is of a specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten-thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads. For items having close tolerance, and fabricated from material having 160,000 pounds per square inch (1100 megapascals) minimum tensile strength, see bolt, shear. For items fabricated from material having less than 160,000 pounds per square inch (1100 megapascals) minimum tensile strength and not having a close tolerance, see bolt, machine.
Pricing and Availability
Get a quote for 5306-01-412-9046 close tolerance boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
ST3M735C4-17 | Boeing Company, The |