NSN 5306-01-413-3752
Coaxial Connector
Between 2.638 inches and 2.668 inches fastener length, double hexagon w/hole head style, between 0.383 inches and 0.403 inches head height, width between flats: between 0.485 inches and 0.500 inches .
Manufacturer part number MS21297-07030 for national stock number 5306014133752.
Datasheet
-
Product description
Shear Bolt NSN 5306-01-413-3752.
-
MPN or Model
MS21297-07030
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.763 inches -
Fastener Length
Between 2.638 inches and 2.668 inches -
Head Style
Double hexagon w/hole -
Head Height
Between 0.383 inches and 0.403 inches -
Width Between Flats
Between 0.485 inches and 0.500 inches -
Extended Washer Diameter
Between 0.807 inches and 0.817 inches -
Extended Washer Thickness
Between 0.063 inches and 0.073 inches -
Grip Diameter
Between 0.4360 inches and 0.4370 inches -
End Application
Pacer dawn -
Thread Diameter
0.4375 inches -
Grip Length
Between 1.865 inches and 1.885 inches -
Thready Qty Per Inch (tpi)
20 -
Min. Tensile Strength (psi)
220000 pounds per square inch -
Hardness Rating
46.0 rockwell c and 50.0 rockwell c -
Material
Steel comp h11 -
Material Specification
Ams 6487 assn standard single material response -
Surface Treatment
Cadmium -
Surface Treatment Specification
Mil-c-8837, type ii, class 2 military specification single treatment response -
Thread Series Designator
Unjf
More from these suppliers
- 5935-00-004-2092 MPN MS27473E22A2PElectrical Plug Connector
- 5930-00-066-1462 MPN MS16109-36-3-5NRotary Switch
- 5935-00-074-4728 MPN MS24035-1Electrical Receptacle Connector
- 5935-00-089-2993 MPN MS3126F24-61SYElectrical Plug Connector
- 5940-00-107-1481 MPN MS20659-4Lug Terminal
- 5950-00-108-8530 MPN MS90541-06Radio Frequency Coil
- 5940-00-151-9253 MPN MS35446-22Lug Terminal
- 5930-00-152-8756 MPN MS16109-30-8CNRotary Switch
A high strength, 160,000 pounds per square inch (1100 megapascals) minimum tensile strength externally threaded fastener designed for use in applications involving great shear stress. The head is designed to accommodate an external wrench or driver. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. The unthreaded portion is of specific grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. A locking feature may be incorporated in the design of the head or threads. See bolt, machine and bolt, clevis.
Pricing and Availability
Get a quote for 5306-01-413-3752 shear boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
MS21297-07030 | Military Standards |