NSN 5306-01-414-5769
Coaxial Connector
1.671 inches fastener length, spline extended washer head style, between 0.327 inches and 0.347 inches head height, extended washer diameter: between 0.639 inches and 0.649 inches .
Manufacturer part number 03A100-6-17 for national stock number 5306014145769.
Datasheet
-
Product description
Shear Bolt NSN 5306-01-414-5769.
-
MPN or Model
03A100-6-17
-
Schedule B
7508.90.0000 (Other articles of nickel, nesoi (excluding cloth, grill & netting of nickel wire)) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.608 inches -
Fastener Length
1.671 inches -
Head Style
Spline extended washer -
Head Height
Between 0.327 inches and 0.347 inches -
Extended Washer Diameter
Between 0.639 inches and 0.649 inches -
Extended Washer Thickness
Between 0.059 inches and 0.079 inches -
Grip Diameter
Between 0.3740 inches and 0.3745 inches -
Head Minor Diameter
0.448 inches -
Thread Diameter
0.375 inches -
Grip Length
1.063 inches -
Thready Qty Per Inch (tpi)
24 -
Min. Tensile Strength (psi)
180000 pounds per square inch -
Surface Finish
32.0 microinches threads -
Material
Nickel alloy 718 -
Material Specification
Ams 5662 assn standard single material response -
Surface Treatment
Passivate -
Surface Treatment Specification
Qq-p-35 federal specification single treatment response -
Thread Series Designator
Unjf
More from these suppliers
- 5305-01-373-4839 MPN 3M925C6-12AClose Tolerance Screw
- 5306-01-043-5708 MPN GB511GF7-12Shear Bolt
- 5306-01-044-0738 MPN VAL22034-6F16Shear Bolt
- 5306-01-054-8390 MPN C7521L6-16Shear Bolt
- 5306-01-055-3777 MPN BACB30UU8K30Shear Bolt
- 5306-01-089-4306 MPN 3031T85P01Machine Bolt
- 5306-01-104-4832 MPN BACB30MT6T12Shear Bolt
- 5306-01-181-9713 MPN J334P08BMachine Bolt
A high strength, 160,000 pounds per square inch (1100 megapascals) minimum tensile strength externally threaded fastener designed for use in applications involving great shear stress. The head is designed to accommodate an external wrench or driver. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. The unthreaded portion is of specific grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. A locking feature may be incorporated in the design of the head or threads. See bolt, machine and bolt, clevis.
Pricing and Availability
Get a quote for 5306-01-414-5769 shear boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
03A100-6-17 | Northrop Grumman Systems Corporation |
X385-6-17 | Huck International, Inc. |
385-6-17 | Huck International, Inc. |
VS3320-6-17 | Voi-shan/chatsworth |
385-6-17 | Huck Intl Inc |
X385-6-17 | Huck Intl Inc |
VCG0017-6-17 | Valley-todeco, Inc. |
AIC1655-6-17 | Sps Technologies, Llc |
03A100-6-17 | Northrop Grumman Systems Corporation |
PBF1422-6-17 | Sps Technologies, Llc |
123711-6-17 | Sps Technologies, Llc |
SII1185-6-17 | Sonic Industries Inc. |
MB211-6-17 | Hi-shear Corporation |
VS3320-6-17 | Alcoa Global Fasteners, Inc. |