NSN 5306-01-414-6620
Coaxial Connector
1.258 inches fastener length, spline extended washer head style, between 0.240 inches and 0.260 inches head height, extended washer diameter: between 0.460 inches and 0.470 inches .
Manufacturer part number 03A099-4-13 for national stock number 5306014146620.
Datasheet
-
Product description
Shear Bolt NSN 5306-01-414-6620.
-
MPN or Model
03A099-4-13
-
Schedule B
7508.90.0000 (Other articles of nickel, nesoi (excluding cloth, grill & netting of nickel wire)) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.446 inches -
Fastener Length
1.258 inches -
Head Style
Spline extended washer -
Head Height
Between 0.240 inches and 0.260 inches -
Extended Washer Diameter
Between 0.460 inches and 0.470 inches -
Extended Washer Thickness
Between 0.026 inches and 0.046 inches -
Grip Diameter
Between 0.2490 inches and 0.2495 inches -
Head Minor Diameter
0.318 inches -
Thread Diameter
0.250 inches -
Grip Length
0.812 inches -
Thready Qty Per Inch (tpi)
28 -
Min. Tensile Strength (psi)
220000 pounds per square inch -
Surface Finish
32.0 microinches threads -
Material
Nickel alloy 718 -
Material Specification
Ams 5662 federal specification single material response -
Surface Treatment
Passivate -
Surface Treatment Specification
Qq-p-35 federal specification single treatment response -
Thread Series Designator
Unjf
More from these suppliers
- 5305-00-680-5873 MPN BACB30LU4D17Machine Screw
- 5305-01-380-0777 MPN VCL0008-4-6AClose Tolerance Screw
- 5305-01-412-6376 MPN LD111-0045-2414Close Tolerance Screw
- 5305-01-462-2872 MPN 3M1169V4-5AClose Tolerance Screw
- 5305-01-477-5815 MPN 3M1170V5-6AClose Tolerance Screw
- 5305-01-513-8650 MPN TX1024C9D31-8AClose Tolerance Screw
- 5306-00-514-7741 MPN VEP220555-6-22Machine Bolt
- 5306-01-025-4820 MPN BACB30FD6H14PShear Bolt
A high strength, 160,000 pounds per square inch (1100 megapascals) minimum tensile strength externally threaded fastener designed for use in applications involving great shear stress. The head is designed to accommodate an external wrench or driver. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. The unthreaded portion is of specific grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. A locking feature may be incorporated in the design of the head or threads. See bolt, machine and bolt, clevis.
Pricing and Availability
Get a quote for 5306-01-414-6620 shear boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
03A099-4-13 | Northrop Grumman Systems Corporation |
X384-4-13 | Huck International, Inc. |
DF33004-4-13 | Huck International, Inc. |
VS3318-4-13 | Voi-shan/chatsworth |
DF33004-4-13 | Huck Intl Inc |
X384-4-13 | Huck Intl Inc |
VCG0016-4-13 | Valley-todeco, Inc. |
AIC1654-4-13 | Sps Technologies, Llc |
SLB187-4-13 | Space-lok, Inc. |
03A099-4-13 | Northrop Grumman Systems Corporation |
03A99-4-13 | Northrop Grumman Systems Corporation |
PBF1421-4-13 | Sps Technologies, Llc |
SII1182-4-13 | Sonic Industries Inc. |
MB210-4-13 | Hi-shear Corporation |
123710-4-13 | Sps Technologies, Llc |
VS3318-4-13 | Alcoa Global Fasteners, Inc. |