NSN 5306-01-414-6629
Coaxial Connector
1.305 inches fastener length, spline extended washer head style, between 0.195 inches and 0.215 inches head height, extended washer diameter: between 0.349 inches and 0.359 inches .
Manufacturer part number 03A099-3-15 for national stock number 5306014146629.
Datasheet
-
Product description
Shear Bolt NSN 5306-01-414-6629.
-
MPN or Model
03A099-3-15
-
Schedule B
7508.90.0000 (Other articles of nickel, nesoi (excluding cloth, grill & netting of nickel wire)) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.367 inches -
Fastener Length
1.305 inches -
Head Style
Spline extended washer -
Head Height
Between 0.195 inches and 0.215 inches -
Extended Washer Diameter
Between 0.349 inches and 0.359 inches -
Extended Washer Thickness
Between 0.017 inches and 0.037 inches -
Grip Diameter
Between 0.1890 inches and 0.1895 inches -
Head Minor Diameter
0.253 inches -
Thread Diameter
0.190 inches -
Grip Length
0.938 inches -
Thready Qty Per Inch (tpi)
32 -
Min. Tensile Strength (psi)
220000 pounds per square inch -
Surface Finish
32.0 microinches threads -
Material
Nickel alloy 718 -
Material Specification
Ams 5662 assn standard single material response -
Surface Treatment
Passivate -
Surface Treatment Specification
Qq-p-35 federal specification single treatment response -
Thread Series Designator
Unjf
More from these suppliers
- 5305-01-056-5452 MPN BACB30LU5-4Close Tolerance Screw
- 5305-01-520-8707 MPN BACS12CK08-12Machine Screw
- 5306-00-230-6723 MPN GB511B9-30Shear Bolt
- 5306-00-493-4807 MPN VAL23611-4DS012Close Tolerance Bolt
- 5306-01-045-2870 MPN VAL23608-4-34Shoulder Bolt
- 5306-01-045-2871 MPN VAL23608-4-4Shoulder Bolt
- 5306-01-166-1466 MPN C7521-6-6Shear Bolt
- 5306-01-308-4811 MPN BACB30LU5-10Close Tolerance Bolt
A high strength, 160,000 pounds per square inch (1100 megapascals) minimum tensile strength externally threaded fastener designed for use in applications involving great shear stress. The head is designed to accommodate an external wrench or driver. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. The unthreaded portion is of specific grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. A locking feature may be incorporated in the design of the head or threads. See bolt, machine and bolt, clevis.
Pricing and Availability
Get a quote for 5306-01-414-6629 shear boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
03A099-3-15 | Northrop Grumman Systems Corporation |
X384-3-15 | Huck International, Inc. |
DF33004-3-15 | Huck International, Inc. |
VS3318-3-15 | Voi-shan/chatsworth |
DF33004-3-15 | Huck Intl Inc |
X384-3-15 | Huck Intl Inc |
VCG0016-3-15 | Valley-todeco, Inc. |
AIC1654-3-15 | Sps Technologies, Llc |
SLB187-3-15 | Space-lok, Inc. |
PBF1421-3-15 | Sps Technologies, Llc |
SII1182-3-15 | Sonic Industries Inc. |
MB210-3-15 | Hi-shear Corporation |
123710-3-15 | Sps Technologies, Llc |
VS3318-3-15 | Alcoa Global Fasteners, Inc. |
03A099-3-15 | Northrop Grumman Systems Corporation |