NSN 5306-01-414-6640
Coaxial Connector
1.643 inches fastener length, spline extended washer head style, between 0.383 inches and 0.403 inches head height, extended washer diameter: between 0.807 inches and 0.817 inches .
Manufacturer part number 03A099-7-15 for national stock number 5306014146640.
Datasheet
-
Product description
Shear Bolt NSN 5306-01-414-6640.
-
MPN or Model
03A099-7-15
-
Schedule B
7508.90.0000 (Other articles of nickel, nesoi (excluding cloth, grill & netting of nickel wire)) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.705 inches -
Fastener Length
1.643 inches -
Head Style
Spline extended washer -
Head Height
Between 0.383 inches and 0.403 inches -
Extended Washer Diameter
Between 0.807 inches and 0.817 inches -
Extended Washer Thickness
Between 0.053 inches and 0.073 inches -
Grip Diameter
Between 0.4365 inches and 0.4370 inches -
Head Minor Diameter
0.514 inches -
Thread Diameter
0.4375 inches -
Grip Length
0.938 inches -
Thready Qty Per Inch (tpi)
20 -
Min. Tensile Strength (psi)
220000 pounds per square inch -
Surface Finish
32.0 microinches threads -
Material
Nickel alloy 718 -
Material Specification
Ams 5662 federal specification single material response -
Surface Treatment
Passivate -
Surface Treatment Specification
Qq-p-35 federal specification single treatment response -
Thread Series Designator
Unjf
More from these suppliers
- 5305-00-347-7847 MPN LS15265V3-7Close Tolerance Screw
- 5305-01-300-7338 MPN 3M1034V4-12-15Close Tolerance Screw
- 5305-01-462-2726 MPN 3M1169V4-12AClose Tolerance Screw
- 5305-01-500-6383 MPN ST3M557-4D14Close Tolerance Screw
- 5305-01-600-3699 MPN 3M1277E4D13AMachine Screw
- 5305-01-603-8154 MPN PMT8703-12Close Tolerance Screw
- 5306-00-321-9350 MPN VAL23029-7-10Close Tolerance Bolt
- 5306-00-512-6420 MPN VEP220555-12-27Machine Bolt
A high strength, 160,000 pounds per square inch (1100 megapascals) minimum tensile strength externally threaded fastener designed for use in applications involving great shear stress. The head is designed to accommodate an external wrench or driver. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. The unthreaded portion is of specific grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. A locking feature may be incorporated in the design of the head or threads. See bolt, machine and bolt, clevis.
Pricing and Availability
Get a quote for 5306-01-414-6640 shear boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
03A099-7-15 | Northrop Grumman Systems Corporation |
AIC1654-7-15 | Sps Technologies, Llc |
VCG0016-7-15 | Valley-todeco, Inc. |
SLB187-7-15 | Space-lok, Inc. |
X384-7-15 | Huck International, Inc. |
DF33004-7-15 | Huck International, Inc. |
03A099-7-15 | Northrop Grumman Systems Corporation |
PBF1421-7-15 | Sps Technologies, Llc |
SII1182-7-15 | Sonic Industries Inc. |
MB210-7-15 | Hi-shear Corporation |
123710-7-15 | Sps Technologies, Llc |
VS3318-7-15 | Alcoa Global Fasteners, Inc. |
MB210-7-15 | Lisi Aerospace Canada Corp |
VS3318-7-15 | Voi-shan/chatsworth |
DF33004-7-15 | Huck Intl Inc |
X384-7-15 | Huck Intl Inc |