NSN 5306-01-416-0285
Coaxial Connector
Between 2.401 inches and 2.431 inches fastener length, dished hexagon head style, between 0.375 inches and 0.390 inches head height, width between flats: between 1.052 inches and 1.065 inches .
Manufacturer part number NAS6212-28D for national stock number 5306014160285.
Datasheet
-
Product description
Shear Bolt NSN 5306-01-416-0285.
-
MPN or Model
NAS6212-28D
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.666 inches -
Fastener Length
Between 2.401 inches and 2.431 inches -
Head Style
Dished hexagon -
Head Height
Between 0.375 inches and 0.390 inches -
Width Between Flats
Between 1.052 inches and 1.065 inches -
Grip Diameter
Between 0.7474 inches and 0.7480 inches -
Thread Diameter
0.750 inches -
Grip Length
Between 1.740 inches and 1.760 inches -
Thready Qty Per Inch (tpi)
16 -
Min. Tensile Strength (psi)
160000 pounds per square inch -
Surface Finish
32.0 microinches threads -
Material
Steel -
Thread Series Designator
Unjf
More from these suppliers
- 5940-00-228-4291 MPN NAS1744-4Conductor Splice
- 5940-01-425-7403 MPN NAS1063C8-313Terminal Board Marker Strip
- 4920-01-580-8295 MPN S281A001-501Aircraft Maintenance Fixture
- 5940-01-437-8563 MPN NAS1063A2-107CXTerminal Board Marker Strip
- 5305-00-057-0504 MPN MS51958-7Machine Screw
- 5305-00-057-0536 MPN NASM51958Machine Screw
- 5305-00-059-4550 MPN MS35190-235Machine Screw
- 5305-00-081-1474 MPN NAS608C832H24Socket Head Cap Screw
A high strength, 160,000 pounds per square inch (1100 megapascals) minimum tensile strength externally threaded fastener designed for use in applications involving great shear stress. The head is designed to accommodate an external wrench or driver. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. The unthreaded portion is of specific grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. A locking feature may be incorporated in the design of the head or threads. See bolt, machine and bolt, clevis.
Pricing and Availability
Get a quote for 5306-01-416-0285 shear boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
NAS6212-28D | National Aerospace Standards |