NSN 5306-01-416-0883
Coaxial Connector
Between 2.026 inches and 2.056 inches fastener length, dished hexagon head style, between 0.375 inches and 0.390 inches head height, width between flats: between 1.052 inches and 1.065 inches .
Manufacturer part number NAS6212-22D for national stock number 5306014160883.
Datasheet
-
Product description
Shear Bolt NSN 5306-01-416-0883.
-
MPN or Model
NAS6212-22D
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.666 inches -
Fastener Length
Between 2.026 inches and 2.056 inches -
Head Style
Dished hexagon -
Head Height
Between 0.375 inches and 0.390 inches -
Width Between Flats
Between 1.052 inches and 1.065 inches -
Grip Diameter
Between 0.7474 inches and 0.7480 inches -
Thread Diameter
0.750 inches -
Grip Length
Between 1.365 inches and 1.385 inches -
Thready Qty Per Inch (tpi)
16 -
Min. Tensile Strength (psi)
160000 pounds per square inch -
Surface Finish
32.0 microinches threads -
Material
Steel -
Thread Series Designator
Unjf
More from these suppliers
- 5935-00-137-4487 MPN NAS1643R16T24SNElectrical Plug Connector
- 5945-01-604-6595 MPN M6106/19-019Electromagnetic Relay
- 5940-01-394-5134 MPN NAS707S1Stud Terminal
- 5940-01-451-4410 MPN NAS1063A20-500AXTerminal Board Marker Strip
- 5305-00-023-7577 MPN NAS1191C04P7LSocket Head Cap Screw
- 5305-00-052-6872 MPN MS24627-49Tapping Screw
- 5305-00-058-3790 MPN NAS514P632-9Machine Screw
- 5305-00-068-6599 MPN NAS1351-06-4Socket Head Cap Screw
A high strength, 160,000 pounds per square inch (1100 megapascals) minimum tensile strength externally threaded fastener designed for use in applications involving great shear stress. The head is designed to accommodate an external wrench or driver. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. The unthreaded portion is of specific grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. A locking feature may be incorporated in the design of the head or threads. See bolt, machine and bolt, clevis.
Pricing and Availability
Get a quote for 5306-01-416-0883 shear boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
NAS6212-22D | National Aerospace Standards |