NSN 5306-01-417-3821
Coaxial Connector
External wrenching device on head.
Manufacturer part number MS21250-20032 for national stock number 5306014173821.
Datasheet
-
Product description
Shear Bolt NSN 5306-01-417-3821.
-
MPN or Model
MS21250-20032
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
1.760 inches -
Fastener Length
3.780 inches -
Head Style
Pan -
Head Diameter
Between 2.115 inches and 2.125 inches -
Head Height
1.155 inches -
Grip Diameter
Between 1.247 inches and 1.249 inches -
Thread Diameter
1.250 inches -
Grip Length
Between 1.990 inches and 2.010 inches -
Thready Qty Per Inch (tpi)
12 -
Min. Tensile Strength (psi)
180000 pounds per square inch -
Material
Steel comp 4140 -
Material Specification
Mil-s-5626 military specification single material response -
Surface Treatment
Cadmium and chromate -
Surface Treatment Specification
Qq-p-416 federal specification single treatment response -
Thread Series Designator
Unjf
More from these suppliers
- 5935-00-018-0481 MPN MS3116F10-6PWElectrical Plug Connector
- 5940-00-151-9377 MPN MS35444-3Lug Terminal
- 5935-00-170-7172 MPN MS3450KT28-15SElectrical Receptacle Connector
- 5935-00-177-2170 MPN MS27473E16A42PElectrical Plug Connector
- 5935-00-184-7473 MPN MS3126P10-6PWElectrical Plug Connector
- 5905-00-185-8518 MPN MS35043-19Composition Fixed Resistor
- 5935-00-201-7950 MPN MS3100A18-10PElectrical Receptacle Connector
- 5935-00-238-0735 MPN MS17346R32C17SElectrical Receptacle Connector
A high strength, 160,000 pounds per square inch (1100 megapascals) minimum tensile strength externally threaded fastener designed for use in applications involving great shear stress. The head is designed to accommodate an external wrench or driver. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. The unthreaded portion is of specific grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. A locking feature may be incorporated in the design of the head or threads. See bolt, machine and bolt, clevis.
Pricing and Availability
Get a quote for 5306-01-417-3821 shear boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
MS21250-20032 | Military Standards |
MS21250-20032 | Imi Services Usa Inc |