NSN 5306-01-417-7315
Coaxial Connector
Between 2.438 inches and 2.468 inches fastener length, dished hexagon head style, between 0.188 inches and 0.193 inches head height, width between flats: 0.623 inches .
Manufacturer part number NAS6706DU30 for national stock number 5306014177315.
Datasheet
-
Product description
Shear Bolt NSN 5306-01-417-7315.
-
MPN or Model
NAS6706DU30
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.3 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.578 inches -
Fastener Length
Between 2.438 inches and 2.468 inches -
Head Style
Dished hexagon -
Head Height
Between 0.188 inches and 0.193 inches -
Width Between Flats
0.623 inches -
Grip Diameter
0.523 inches -
Shank Unthreaded Hole Diameter
0.106 inches and 0.116 inches threads -
Thread Diameter
0.3750 inches -
Grip Length
Between 1.865 inches and 1.885 inches -
Thready Qty Per Inch (tpi)
24 -
Min. Tensile Strength (psi)
160000 pounds per square inch -
Minimum Yield Strength
95000 pounds per square inch -
Distance From Head Largest Bearing Surface To Shank Hole Center
2.358 inches and 2.378 inches threads -
Surface Finish
32.0 microinches threads -
Material
Stainless steel -
Material Specification
Ams 5731 assn standard single material response or ams 5737 assn standard single material response -
Thread Series Designator
Unjf -
Specification Data
80205-nas6706 professional/industrial association standard
More from these suppliers
- 5935-00-989-0884 MPN NAS1196-9Receptacle Dummy Connector
- 5940-01-510-2783 MPN NAS1063C3Terminal Board Cover
- 5940-01-394-5134 MPN NAS707S1Stud Terminal
- 5305-00-003-6708 MPN NAS1096-10-13Machine Screw
- 5305-00-007-6207 MPN NAS1393E00-3Machine Screw
- 5305-00-008-9112 MPN NAS1190C02T3LSocket Head Cap Screw
- 5305-00-023-0055 MPN NAS560HK3-28Machine Screw
- 5305-00-078-9820 MPN NAS517-3-39Machine Screw
A high strength, 160,000 pounds per square inch (1100 megapascals) minimum tensile strength externally threaded fastener designed for use in applications involving great shear stress. The head is designed to accommodate an external wrench or driver. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. The unthreaded portion is of specific grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. A locking feature may be incorporated in the design of the head or threads. See bolt, machine and bolt, clevis.
Pricing and Availability
Get a quote for 5306-01-417-7315 shear boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
NAS6706DU30 | National Aerospace Standards |