NSN 5306-01-417-7802
Shouldered Rivet Ring Bolt
About this product
Between 0.250 inches and 0.253 inches eye inside diameter, 0.094 inches shoulder thickness, between 1.578 inches and 1.625 inches shank length, eye stock thickness: between 0.183 inches and 0.193 inches .
Manufacturer part number AN44-C14A for national stock number 5306014177802.
Datasheet
-
Product description
Eye Bolt NSN 5306-01-417-7802.
-
MPN or Model
AN44-C14A
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.532 inches -
Eye Inside Diameter
Between 0.250 inches and 0.253 inches -
Shoulder Thickness
0.094 inches -
Shank Length
Between 1.578 inches and 1.625 inches -
Eye Stock Thickness
Between 0.183 inches and 0.193 inches -
Shoulder Diameter
0.625 inches -
Overall Length
2.484 inches -
Thread Diameter
0.312 inches -
Thready Qty Per Inch (tpi)
24 -
Min. Tensile Strength (psi)
125000 pounds per square inch -
Hardness Rating
26.0 rockwell c and 32.0 rockwell c -
Distance From Center Of Eye To Shank End
2.125 inches -
Eye Outside Width
0.312 inches -
Material
Steel comp 431 -
Material Specification
Mil-s-18732 military specification single material response -
Surface Treatment
Passivate -
Surface Treatment Specification
Qq-p-35 federal specification single treatment response -
Style Designator
Round, closed w/shoulder -
Thread Series Designator
Unf
More from these suppliers
- 5940-00-159-0247 MPN NAS709S-1Feedthru Terminal
- 5935-00-111-1891 MPN NAS1665-14Electrical Connector Backshell
- 5935-00-111-1891 MPN NAS1665-14Electrical Connector Backshell
- 5305-00-008-7856 MPN NAS1742C04-6USocket Head Cap Screw
- 5305-00-058-2067 MPN NAS1352-06H6PSocket Head Cap Screw
- 5305-00-058-4009 MPN MS24694S117Machine Screw
- 5305-00-079-7960 MPN MS24694S208Machine Screw
- 5305-00-150-3408 MPN MS35206-329Machine Screw
Eye Bolt
An externally threaded device whose threaded portion is of one nominal diameter, without a head, but with the unthreaded end either bent more than 225 degrees (3.925 radians) or cast, forged, or punched to resemble an eye. See also bolt, hook. Excludes connector, rod end.
Pricing and Availability
Get a quote for 5306-01-417-7802 eye boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
AN44-C14A | National Aerospace Standards |
AN44-C14A | Aeronautical Standards Group |
Stock Check
Availability of this NSN has not been updated recently. Submit
the pricing and availbility form above to receive an up to date quote.