NSN 5306-01-417-9024
Close Tolerance Hex Head Bolt
0.875 inches fastener length, double hexagon w/hole head style, 0.258 inches head height, width between flats: 0.250 inches .
Manufacturer part number AS3167-07 for national stock number 5306014179024.
Datasheet
-
Product description
Close Tolerance Bolt NSN 5306-01-417-9024.
-
MPN or Model
AS3167-07
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093490 - Bolt/nut/screw/clips/fastener/etc -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.418 inches and 0.446 inches -
Fastener Length
0.875 inches -
Head Style
Double hexagon w/hole -
Head Height
0.258 inches -
Width Between Flats
0.250 inches -
Extended Washer Diameter
0.375 inches -
Extended Washer Thickness
0.040 inches -
Grip Diameter
Between 0.1885 inches and 0.1895 inches -
Thread Diameter
0.190 inches -
Grip Length
0.376 inches -
Thready Qty Per Inch (tpi)
32 -
Surface Finish
32.0 microinches threads -
Material
Steel comp 630 -
Material Specification
Ams 5643 assn standard single material response -
Surface Treatment
Passivate -
Surface Treatment Specification
Qq-p-35 federal specification single treatment response -
Thread Series Designator
Unjf
More from these suppliers
- 5935-01-158-4824 MPN M85049/1716N06Electrical Connector Backshell
- 5935-01-142-5352 MPN AS50151Electrical Plug Connector
- 5935-01-207-6537 MPN M85049/10-72WElectrical Connector Backshell
- 5935-01-239-5246 MPN AS85049/63Electrical Connector Cable Clamp
- 5935-01-246-3544 MPN MS3406DJ20A4PYElectrical Plug Connector
- 5935-01-350-5881 MPN M85049/60-1N10Connector Adapter
- 5935-01-382-8074 MPN MS3406D22-28SElectrical Plug Connector
- 5985-01-399-4449 MPN AS3269-096Antenna Support Sleeve
An externally threaded fastener whose unthreaded portion is of a specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten-thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads. For items having close tolerance, and fabricated from material having 160,000 pounds per square inch (1100 megapascals) minimum tensile strength, see bolt, shear. For items fabricated from material having less than 160,000 pounds per square inch (1100 megapascals) minimum tensile strength and not having a close tolerance, see bolt, machine.
Pricing and Availability
Get a quote for 5306-01-417-9024 close tolerance boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
AS3167-07 | Society Of Automotive Engineers Inc |
AS3167-07 | Sae International |
AS3167-07 | Sae International |
Stock Check
- NE: 2