NSN 5306-01-419-5023
Coaxial Connector
On.750(-12)and larger, center drilling of shank is optional.
Manufacturer part number AIC874-9-32 for national stock number 5306014195023.
Datasheet
-
Product description
Shear Bolt NSN 5306-01-419-5023.
-
MPN or Model
AIC874-9-32
-
Schedule B
7508.90.0000 (Other articles of nickel, nesoi (excluding cloth, grill & netting of nickel wire)) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.997 inches -
Fastener Length
Between 2.982 inches and 3.012 inches -
Head Style
Spline extended washer -
Head Height
Between 0.495 inches and 0.515 inches -
Extended Washer Diameter
Between 1.037 inches and 1.047 inches -
Extended Washer Thickness
Between 0.071 inches and 0.091 inches -
Grip Diameter
Between 0.5605 inches and 0.5615 inches -
Head Minor Diameter
Between 0.711 inches and 0.717 inches -
Thread Diameter
0.562 inches -
Grip Length
Between 1.990 inches and 2.010 inches -
Thready Qty Per Inch (tpi)
18 -
Min. Tensile Strength (psi)
220000 pounds per square inch -
Surface Finish
32.0 microinches grip -
Material
Nickel alloy 718 -
Material Specification
Ams 5662 assn standard single material response -
Surface Treatment
Passivate -
Surface Treatment Specification
Qq-p-35 federal specification single treatment response -
Thread Series Designator
Unjf
More from these suppliers
- 5305-00-526-0474 MPN 15265V06-2Close Tolerance Screw
- 5305-01-102-5520 MPN ST3M714-3-7Close Tolerance Screw
- 5305-01-173-3602 MPN ST3M557-3-6Close Tolerance Screw
- 5305-01-203-1665 MPN BACB30LU3-16Close Tolerance Screw
- 5305-01-327-5691 MPN VCL0008-3-13Close Tolerance Screw
- 5305-01-355-6951 MPN VCL0009-7D26Close Tolerance Screw
- 5305-01-496-1423 MPN 3M1170C4-9AClose Tolerance Screw
- 5305-01-536-4449 MPN 3M1278E4D8AShoulder Screw
A high strength, 160,000 pounds per square inch (1100 megapascals) minimum tensile strength externally threaded fastener designed for use in applications involving great shear stress. The head is designed to accommodate an external wrench or driver. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. The unthreaded portion is of specific grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. A locking feature may be incorporated in the design of the head or threads. See bolt, machine and bolt, clevis.
Pricing and Availability
Get a quote for 5306-01-419-5023 shear boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
AIC874-9-32 | Sps Technologies, Llc |
VCG0037-9-32 | Valley-todeco, Inc. |
PBF1594-9-32 | Sps Technologies, Llc |
84604-9-32 | Sps Technologies, Llc |
3D0073-9-32 | Boeing Company, The |
874-9-32 | Sps Technologies, Llc |