NSN 5306-01-419-5552
Coaxial Connector
2.153 inches fastener length, dished hexagon head style, between 0.219 inches and 0.234 inches head height, width between flats: between 0.678 inches and 0.690 inches .
Manufacturer part number NAS6307-26 for national stock number 5306014195552.
Datasheet
-
Product description
Shear Bolt NSN 5306-01-419-5552.
-
MPN or Model
NAS6307-26
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.528 inches -
Fastener Length
2.153 inches -
Head Style
Dished hexagon -
Head Height
Between 0.219 inches and 0.234 inches -
Width Between Flats
Between 0.678 inches and 0.690 inches -
Grip Diameter
Between 0.436 inches and 0.437 inches -
Thread Diameter
0.437 inches -
Grip Length
Between 1.615 inches and 1.635 inches -
Thready Qty Per Inch (tpi)
20 -
Min. Tensile Strength (psi)
16000 pounds per square inch -
Material
Iron alloy 660 -
Thread Series Designator
Unjf
More from these suppliers
- 5935-00-111-1891 MPN NAS1665-14Electrical Connector Backshell
- 5940-01-027-5921 MPN NAS1389-1Conductor Splice
- 5940-01-547-0035 MPN NAS1389-2Conductor Splice
- 5940-01-451-4311 MPN NAS1744-1Conductor Splice
- 5305-00-007-9882 MPN NAS1100C04-18PMachine Screw
- 5305-00-051-7371 MPN NAS560XK4-9Machine Screw
- 5305-00-059-8392 MPN MS35215-62Machine Screw
- 5305-00-088-3819 MPN NAS1631-12Machine Screw
A high strength, 160,000 pounds per square inch (1100 megapascals) minimum tensile strength externally threaded fastener designed for use in applications involving great shear stress. The head is designed to accommodate an external wrench or driver. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. The unthreaded portion is of specific grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. A locking feature may be incorporated in the design of the head or threads. See bolt, machine and bolt, clevis.
Pricing and Availability
Get a quote for 5306-01-419-5552 shear boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
NAS6307-26 | National Aerospace Standards |