NSN 5306-01-420-7065
Shouldered Rivet Ring Bolt
About this product
Between 0.375 inches and 0.378 inches eye inside diameter, 0.094 inches shoulder thickness, between 0.686 inches and 0.734 inches shank length, eye stock thickness: between 0.183 inches and 0.193 inches .
Manufacturer part number AN46C85A for national stock number 5306014207065.
Datasheet
-
Product description
Eye Bolt NSN 5306-01-420-7065.
-
MPN or Model
AN46C85A
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.641 inches -
Eye Inside Diameter
Between 0.375 inches and 0.378 inches -
Shoulder Thickness
0.094 inches -
Shank Length
Between 0.686 inches and 0.734 inches -
Eye Stock Thickness
Between 0.183 inches and 0.193 inches -
Shoulder Diameter
0.750 inches -
Shank Unthreaded Hole Diameter
0.106 inches -
Overall Length
1.719 inches -
Thread Diameter
0.375 inches -
Thready Qty Per Inch (tpi)
18 -
Min. Tensile Strength (psi)
125000 pounds per square inch -
Hardness Rating
26.0 rockwell c and 32.0 rockwell c -
Distance From Center Of Eye To Shank End
1.297 inches -
Distance From Threaded End To Shank Hole Center
0.203 inches threads -
Eye Outside Width
0.750 inches -
Material
Steel comp 431 -
Material Specification
Mil-s-18732 military specification single material response -
Surface Treatment
Passivate -
Surface Treatment Specification
Qq-p-35 federal specification single treatment response -
Style Designator
Round, closed w/shoulder -
Thread Series Designator
Unf
More from these suppliers
- 5940-01-451-2578 MPN NAS1063C3-539DTerminal Board Marker Strip
- 5940-01-451-4408 MPN NAS1063A10-105BXTerminal Board Marker Strip
- 5940-01-451-4411 MPN NAS1063A2-107ALTerminal Board Marker Strip
- 5305-00-007-0282 MPN NAS1100C08-12PMachine Screw
- 5305-00-007-3012 MPN AN565BC1032H10Setscrew
- 5305-00-008-5892 MPN NAS1102C08-30Machine Screw
- 5305-00-052-7425 MPN NASM35198-92Machine Screw
- 5305-00-052-9802 MPN MS24694C50Machine Screw
Eye Bolt
An externally threaded device whose threaded portion is of one nominal diameter, without a head, but with the unthreaded end either bent more than 225 degrees (3.925 radians) or cast, forged, or punched to resemble an eye. See also bolt, hook. Excludes connector, rod end.
Pricing and Availability
Get a quote for 5306-01-420-7065 eye boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
AN46C85A | National Aerospace Standards |
AN46C85A | Aeronautical Standards Group |
AN46C85A | National Aerospace Standards |
AN46C85A | Aeronautical Standards Group |
Stock Check
Availability of this NSN has not been updated recently. Submit
the pricing and availbility form above to receive an up to date quote.