NSN 5306-01-423-6768
Coaxial Connector
Dished hexagon head style, between 0.188 inches and 0.203 inches head height, between 0.554 inches and 0.564 inches width between flats, thready qty per inch (tpi): 24.
Manufacturer part number NAS6206-47 for national stock number 5306014236768.
Datasheet
-
Product description
Shear Bolt NSN 5306-01-423-6768.
-
MPN or Model
NAS6206-47
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.429 inches and 0.479 inches -
Head Style
Dished hexagon -
Head Height
Between 0.188 inches and 0.203 inches -
Width Between Flats
Between 0.554 inches and 0.564 inches -
Thready Qty Per Inch (tpi)
24 -
Min. Tensile Strength (psi)
160000 pounds per square inch -
Hardness Rating
36.0 rockwell c and 40.0 rockwell c -
Surface Finish
32.0 microinches threads -
Material
Steel comp e4340 or steel comp 8740 -
Thread Series Designator
Unjf
More from these suppliers
- 5940-00-432-7375 MPN NAS1746-1Conductor Splice
- 5305-00-007-9882 MPN NAS1100E04-18PMachine Screw
- 5305-00-052-5926 MPN MS35198-74Machine Screw
- 5305-00-052-9046 MPN MS24630-27Tapping Screw
- 5305-00-058-4099 MPN NAS1190-06T8LSocket Head Cap Screw
- 5305-00-128-1996 MPN NAS222-27Machine Screw
- 5305-00-145-0792 MPN NAS1123-11HClose Tolerance Screw
- 5305-00-166-0916 MPN NAS1152-10Close Tolerance Screw
A high strength, 160,000 pounds per square inch (1100 megapascals) minimum tensile strength externally threaded fastener designed for use in applications involving great shear stress. The head is designed to accommodate an external wrench or driver. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. The unthreaded portion is of specific grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. A locking feature may be incorporated in the design of the head or threads. See bolt, machine and bolt, clevis.
Pricing and Availability
Get a quote for 5306-01-423-6768 shear boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
NAS6206-47 | National Aerospace Standards |