NSN 5306-01-424-5919
Coaxial Connector
Dished hexagon head style, 0.110 inches head height, between 0.367 inches and 0.376 inches width between flats, thread diameter: 0.190 inches.
Manufacturer part number NAS1303-16 for national stock number 5306014245919.
Datasheet
-
Product description
Shear Bolt NSN 5306-01-424-5919.
-
MPN or Model
NAS1303-16
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.1 lb -
Thread Class
3a -
Thread Length
1.338 inches -
Head Style
Dished hexagon -
Head Height
0.110 inches -
Width Between Flats
Between 0.367 inches and 0.376 inches -
Thread Diameter
0.190 inches -
Thready Qty Per Inch (tpi)
32 -
Material
Stainless steel -
Surface Treatment
Cadmium -
Thread Series Designator
Unjf
More from these suppliers
- 5940-01-527-5276 MPN NAS1388-4Conductor Splice
- 5935-00-111-1892 MPN NAS1665-16Electrical Connector Backshell
- 1560-01-423-0218 MPN NAS6808D39Aircraft Structural Component Support
- 5940-01-451-4408 MPN NAS1063A10-105BXTerminal Board Marker Strip
- 5940-01-666-7087 MPN NAS1063C6-619ATerminal Board Marker Strip
- 5305-00-031-1042 MPN MS24693-2BMachine Screw
- 5305-00-052-6872 MPN MS24627-49Tapping Screw
- 5305-00-052-7483 MPN MS35198-85Machine Screw
A high strength, 160,000 pounds per square inch (1100 megapascals) minimum tensile strength externally threaded fastener designed for use in applications involving great shear stress. The head is designed to accommodate an external wrench or driver. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. The unthreaded portion is of specific grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. A locking feature may be incorporated in the design of the head or threads. See bolt, machine and bolt, clevis.
Pricing and Availability
Get a quote for 5306-01-424-5919 shear boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
NAS1303-16 | National Aerospace Standards |