NSN 5306-01-424-9556
Coaxial Connector
Between 2.649 inches and 2.679 inches fastener length, spline extended washer head style, 0.700 inches head height, extended washer diameter: between 1.615 inches and 1.625 inches .
Manufacturer part number VCG0037-14-20 for national stock number 5306014249556.
Datasheet
-
Product description
Shear Bolt NSN 5306-01-424-9556.
-
MPN or Model
VCG0037-14-20
-
Schedule B
7508.90.0000 (Other articles of nickel, nesoi (excluding cloth, grill & netting of nickel wire)) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
1.414 inches -
Fastener Length
Between 2.649 inches and 2.679 inches -
Head Style
Spline extended washer -
Head Height
0.700 inches -
Extended Washer Diameter
Between 1.615 inches and 1.625 inches -
Extended Washer Thickness
0.120 inches -
Grip Diameter
Between 0.8730 inches and 0.8740 inches -
Head Minor Diameter
Between 0.923 inches and 0.938 inches -
Thread Diameter
0.875 inches -
Grip Length
1.250 inches -
Thready Qty Per Inch (tpi)
14 -
Min. Tensile Strength (psi)
220000 pounds per square inch -
Minimum Yield Strength
125000 pounds per square inch -
Surface Finish
32.0 microinches grip -
Material
Nickel alloy 718 -
Material Specification
Ams 5662 assn standard single material response -
Surface Treatment
Passivate -
Surface Treatment Specification
Qq-p-35 federal specification single treatment response -
Thread Series Designator
Unjf
More from these suppliers
- 5305-00-680-5923 MPN BACB30LU4-17Close Tolerance Screw
- 5305-01-006-2736 MPN ST3M454-4LBClose Tolerance Screw
- 5305-01-054-4636 MPN BACB30LK3-4Close Tolerance Screw
- 5305-01-055-1145 MPN BACB30LU3-18Close Tolerance Screw
- 5305-01-164-2330 MPN BACB30LU3P6Close Tolerance Screw
- 5305-01-462-2836 MPN 3M1169V4-7AClose Tolerance Screw
- 5305-01-485-5722 MPN 3M1170D4-20AClose Tolerance Screw
- 5305-01-512-8299 MPN 3M1170C6-18AClose Tolerance Screw
A high strength, 160,000 pounds per square inch (1100 megapascals) minimum tensile strength externally threaded fastener designed for use in applications involving great shear stress. The head is designed to accommodate an external wrench or driver. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. The unthreaded portion is of specific grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. A locking feature may be incorporated in the design of the head or threads. See bolt, machine and bolt, clevis.
Pricing and Availability
Get a quote for 5306-01-424-9556 shear boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
VCG0037-14-20 | Valley-todeco, Inc. |
AIC874-14-20 | Sps Technologies, Llc |
PBF1594-14-20 | Sps Technologies, Llc |
84604-14-20 | Sps Technologies, Llc |
3D0073-14-20 | Boeing Company, The |