NSN 5306-01-424-9557
Coaxial Connector
Between 2.521 inches and 2.551 inches fastener length, spline extended washer head style, 0.337 inches head height, extended washer diameter: between 0.691 inches and 0.701 inches .
Manufacturer part number VCG0037-6-28 for national stock number 5306014249557.
Datasheet
-
Product description
Shear Bolt NSN 5306-01-424-9557.
-
MPN or Model
VCG0037-6-28
-
Schedule B
7508.90.0000 (Other articles of nickel, nesoi (excluding cloth, grill & netting of nickel wire)) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.786 inches -
Fastener Length
Between 2.521 inches and 2.551 inches -
Head Style
Spline extended washer -
Head Height
0.337 inches -
Extended Washer Diameter
Between 0.691 inches and 0.701 inches -
Extended Washer Thickness
0.054 inches -
Grip Diameter
Between 0.3735 inches and 0.3745 inches -
Head Minor Diameter
Between 0.438 inches and 0.453 inches -
Thread Diameter
0.375 inches -
Grip Length
1.750 inches -
Thready Qty Per Inch (tpi)
24 -
Min. Tensile Strength (psi)
220000 pounds per square inch -
Minimum Yield Strength
125000 pounds per square inch -
Surface Finish
32.0 microinches grip -
Material
Nickel alloy 718 -
Material Specification
Ams 5662 assn standard single material response -
Surface Treatment
Passivate -
Surface Treatment Specification
Qq-p-35 federal specification single treatment response -
Thread Series Designator
Unjf
More from these suppliers
- 5305-01-462-2749 MPN 3M1169V6-20AClose Tolerance Screw
- 5305-01-496-1417 MPN TX1024C4D34-6AClose Tolerance Screw
- 5305-01-519-8247 MPN BACS12ER3K20Machine Screw
- 5306-00-121-8184 MPN MS21250-07034Shear Bolt
- 5306-00-160-1586 MPN STSBG001A06U026Close Tolerance Bolt
- 5306-00-508-7699 MPN VEP220555-8-14Machine Bolt
- 5306-00-516-5998 MPN VEP220555-8-23Machine Bolt
- 5306-00-819-3484 MPN 684018-18Machine Bolt
A high strength, 160,000 pounds per square inch (1100 megapascals) minimum tensile strength externally threaded fastener designed for use in applications involving great shear stress. The head is designed to accommodate an external wrench or driver. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. The unthreaded portion is of specific grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. A locking feature may be incorporated in the design of the head or threads. See bolt, machine and bolt, clevis.
Pricing and Availability
Get a quote for 5306-01-424-9557 shear boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
VCG0037-6-28 | Valley-todeco, Inc. |
AIC874-6-28 | Sps Technologies, Llc |
PBF1594-6-28 | Sps Technologies, Llc |
84604-6-28 | Sps Technologies, Llc |
3D0073-6-28 | Boeing Company, The |