NSN 5306-01-425-6236
Coaxial Connector
Green dye or paint on thread end.
Manufacturer part number NAS6306-38 for national stock number 5306014256236.
Datasheet
-
Product description
Shear Bolt NSN 5306-01-425-6236.
-
MPN or Model
NAS6306-38
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.454 inches -
Fastener Length
Between 2.814 inches and 2.834 inches -
Head Style
Dished hexagon -
Head Height
Between 0.188 inches and 0.203 inches -
Width Between Flats
Between 0.554 inches and 0.564 inches -
Grip Diameter
Between 0.3735 inches and 0.3745 inches -
Thread Diameter
0.375 inches -
Grip Length
Between 2.365 inches and 2.385 inches -
Thready Qty Per Inch (tpi)
24 -
Min. Tensile Strength (psi)
160000 pounds per square inch -
Minimum Yield Strength
95000 pounds per square inch -
Surface Finish
32.0 microinches threads -
Material
Iron alloy 660 -
Material Specification
Ams 5731 assn standard single material response and ams5737 assn standard single material response -
Surface Treatment
Cadmium and chromate -
Surface Treatment Specification
Qq-p-416, type 2, class 3 federal specification all treatment responses -
Thread Series Designator
Unjf -
Specification Data
80205-nas6306 professional/industrial association standard
More from these suppliers
- 5940-00-833-5836 MPN NAS1063A2-702Terminal Board Marker Strip
- 1680-01-501-4762 MPN NAS42DD6-70FCAircr Sleeve Spacer
- 5935-01-513-0334 MPN 5A088Electrical Receptacle Connector
- 5305-00-052-5927 MPN MS35198-76Machine Screw
- 5305-00-058-9362 MPN MS51977-19Setscrew
- 5305-00-079-7980 MPN MS24694S198Machine Screw
- 5305-00-150-0810 MPN NAS1100C08-46PMachine Screw
- 5305-00-282-8478 MPN 335P25Machine Screw
A high strength, 160,000 pounds per square inch (1100 megapascals) minimum tensile strength externally threaded fastener designed for use in applications involving great shear stress. The head is designed to accommodate an external wrench or driver. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. The unthreaded portion is of specific grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. A locking feature may be incorporated in the design of the head or threads. See bolt, machine and bolt, clevis.
Pricing and Availability
Get a quote for 5306-01-425-6236 shear boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
NAS6306-38 | National Aerospace Standards |
Stock Check
- NE: 346
- NS: 5