NSN 5306-01-431-3166
Coaxial Connector
Between 1.535 inches and 1.565 inches fastener length, hexagon head style, between 0.110 inches and 0.125 inches head height, width between flats: between 0.367 inches and 0.376 inches .
Manufacturer part number NAS1304-18H for national stock number 5306014313166.
Datasheet
-
Product description
Shear Bolt NSN 5306-01-431-3166.
-
MPN or Model
NAS1304-18H
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.1 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.425 inches -
Fastener Length
Between 1.535 inches and 1.565 inches -
Head Style
Hexagon -
Head Height
Between 0.110 inches and 0.125 inches -
Width Between Flats
Between 0.367 inches and 0.376 inches -
Hole Diameter
Between 0.036 inches and 0.046 inches -
Grip Diameter
Between 0.1885 inches and 0.1895 inches -
Thread Diameter
0.2500 inches -
Grip Length
Between 1.115 inches and 1.135 inches -
Hole Quantity
3 -
Hole Type
Drilled -
Thready Qty Per Inch (tpi)
28 -
Min. Tensile Strength (psi)
160000 pounds per square inch -
Hardness Rating
36.0 rockwell c grip and 40.0 rockwell c grip -
Hole Configuration Style
Double hexagon flats -
Material
Steel -
Material Specification
Mil-b-7838 military specification single material response -
Surface Treatment
Cadmium -
Surface Treatment Specification
Qq-p-416, type1, cl2 federal specification single treatment response -
Thread Series Designator
Unjf
More from these suppliers
- 5305-00-052-8250 MPN NAS1351-08-8PSocket Head Cap Screw
- 5305-00-082-5113 MPN MS27039-4-14Machine Screw
- 5305-00-104-2814 MPN NAS1352-8LE52PSocket Head Cap Screw
- 5305-00-145-1011 MPN NAS1132-14Close Tolerance Screw
- 5305-00-159-5545 MPN NAS1101E04-10Machine Screw
- 5305-00-205-3463 MPN NAS1351-4H10Socket Head Cap Screw
- 5305-00-205-3844 MPN NAS1218-3-9Machine Screw
- 5305-00-269-4521 MPN MS24694S176Machine Screw
A high strength, 160,000 pounds per square inch (1100 megapascals) minimum tensile strength externally threaded fastener designed for use in applications involving great shear stress. The head is designed to accommodate an external wrench or driver. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. The unthreaded portion is of specific grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. A locking feature may be incorporated in the design of the head or threads. See bolt, machine and bolt, clevis.
Pricing and Availability
Get a quote for 5306-01-431-3166 shear boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
NAS1304-18H | National Aerospace Standards |