NSN 5306-01-431-3544
Coaxial Connector
Between 1.776 inches and 1.806 inches fastener length, dished hexagon head style, between 0.375 inches and 0.390 inches head height, width between flats: between 1.052 inches and 1.065 inches .
Manufacturer part number NAS6212-18D for national stock number 5306014313544.
Datasheet
-
Product description
Shear Bolt NSN 5306-01-431-3544.
-
MPN or Model
NAS6212-18D
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.666 inches -
Fastener Length
Between 1.776 inches and 1.806 inches -
Head Style
Dished hexagon -
Head Height
Between 0.375 inches and 0.390 inches -
Width Between Flats
Between 1.052 inches and 1.065 inches -
Grip Diameter
Between 0.7474 inches and 0.7480 inches -
Thread Diameter
0.750 inches -
Grip Length
Between 1.115 inches and 1.135 inches -
Thready Qty Per Inch (tpi)
16 -
Min. Tensile Strength (psi)
160000 pounds per square inch -
Material
Steel -
Thread Series Designator
Unjf
More from these suppliers
- 1680-01-257-2404 MPN NAS26-10Trunnion-tank Strap
- 5940-01-658-0448 MPN NAS1063Terminal Board Marker Strip
- 5305-00-016-6327 MPN MS24627-38Tapping Screw
- 5305-00-022-3095 MPN NAS1352-7LE16PSocket Head Cap Screw
- 5305-00-053-5458 MPN NAS1402-42Machine Screw
- 5305-00-059-3669 MPN NAS1635-3-40Machine Screw
- 5305-00-104-5096 MPN NAS1635-08LE4Socket Head Cap Screw
- 5305-00-182-9382 MPN NAS1100C3-10PMachine Screw
A high strength, 160,000 pounds per square inch (1100 megapascals) minimum tensile strength externally threaded fastener designed for use in applications involving great shear stress. The head is designed to accommodate an external wrench or driver. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. The unthreaded portion is of specific grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. A locking feature may be incorporated in the design of the head or threads. See bolt, machine and bolt, clevis.
Pricing and Availability
Get a quote for 5306-01-431-3544 shear boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
NAS6212-18D | National Aerospace Standards |
Stock Check
- NS: 87
- NE: 214
- AR: 1
- SV: 1