NSN 5306-01-431-7887
Coaxial Connector
Between 2.609 inches and 2.656 inches fastener length, hexagon head style, 0.281 inches head height, width between flats: between 0.865 inches and 0.877 inches .
Manufacturer part number NAS464P9-34 for national stock number 5306014317887.
Datasheet
-
Product description
Shear Bolt NSN 5306-01-431-7887.
-
MPN or Model
NAS464P9-34
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.500 inches -
Fastener Length
Between 2.609 inches and 2.656 inches -
Head Style
Hexagon -
Head Height
0.281 inches -
Width Between Flats
Between 0.865 inches and 0.877 inches -
Grip Diameter
0.561 inches -
Thread Diameter
0.562 inches -
Grip Length
2.125 inches -
Thready Qty Per Inch (tpi)
18 -
Min. Tensile Strength (psi)
160000 pounds per square inch -
Material
Steel -
Thread Series Designator
Unjf
More from these suppliers
- 5940-00-833-5836 MPN NAS1063A20-21Terminal Board Marker Strip
- 5935-01-323-4638 MPN MS33686-22-2PElectrical Connector Insert
- 5940-01-425-7558 MPN NAS1063A3-TB504AHTerminal Board Marker Strip
- 5940-01-447-2944 MPN NAS1063A3-504ALTerminal Board Marker Strip
- 5940-01-666-5991 MPN NAS1063Terminal Board Marker Strip
- 5305-00-008-5886 MPN NAS1102E06-8PMachine Screw
- 5305-00-042-9478 MPN MS90725-90Hexagon Head Cap Screw
- 5305-00-057-1717 MPN NAS1101-04H3Machine Screw
A high strength, 160,000 pounds per square inch (1100 megapascals) minimum tensile strength externally threaded fastener designed for use in applications involving great shear stress. The head is designed to accommodate an external wrench or driver. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. The unthreaded portion is of specific grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. A locking feature may be incorporated in the design of the head or threads. See bolt, machine and bolt, clevis.
Pricing and Availability
Get a quote for 5306-01-431-7887 shear boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
NAS464P9-34 | National Aerospace Standards |
NAS464P9-34 | National Aerospace Standards |
NAS464P9-34 | National Aerospace Standards |
NAS464P9-34 | National Aerospace Standards |
NAS464P9-34 | National Aerospace Standards |