NSN 5306-01-432-6141
Coaxial Connector
Drilled shank.
Manufacturer part number NAS1308-42D for national stock number 5306014326141.
Datasheet
-
Product description
Shear Bolt NSN 5306-01-432-6141.
-
MPN or Model
NAS1308-42D
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.735 inches -
Fastener Length
3.360 inches -
Head Style
Dished hexagon -
Head Height
0.250 inches -
Width Between Flats
Between 0.741 inches and 0.752 inches -
Grip Diameter
Between 0.4979 inches and 0.4985 inches -
Thread Diameter
0.500 inches -
Grip Length
2.625 inches -
Thready Qty Per Inch (tpi)
20 -
Min. Tensile Strength (psi)
160000 pounds per square inch -
Material
Steel -
Thread Series Designator
Unjf
More from these suppliers
- 5930-00-508-0291 MPN NAS543-2ASwitch
- 5940-01-384-3878 MPN NAS1063A2TB107TTerminal Board Marker Strip
- 5305-00-004-7208 MPN NAS1100V3-8Machine Screw
- 5305-00-061-7961 MPN NAS1503-7Machine Screw
- 5305-00-066-7323 MPN NASM24694-C63Machine Screw
- 5305-00-068-5407 MPN MS16996-16Socket Head Cap Screw
- 5305-00-225-9092 MPN MS90726-37Hexagon Head Cap Screw
- 5305-00-225-9561 MPN NAS1351-8-12PSocket Head Cap Screw
A high strength, 160,000 pounds per square inch (1100 megapascals) minimum tensile strength externally threaded fastener designed for use in applications involving great shear stress. The head is designed to accommodate an external wrench or driver. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. The unthreaded portion is of specific grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. A locking feature may be incorporated in the design of the head or threads. See bolt, machine and bolt, clevis.
Pricing and Availability
Get a quote for 5306-01-432-6141 shear boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
NAS1308-42D | National Aerospace Standards |