NSN 5306-01-432-6144
Coaxial Connector
3.619 inches fastener length, double hexagon w/hole head style, 0.388 inches head height, width between flats: between 0.430 inches and 0.439 inches .
Manufacturer part number NAS626H48 for national stock number 5306014326144.
Datasheet
-
Product description
Shear Bolt NSN 5306-01-432-6144.
-
MPN or Model
NAS626H48
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.619 inches -
Fastener Length
3.619 inches -
Head Style
Double hexagon w/hole -
Head Height
0.388 inches -
Width Between Flats
Between 0.430 inches and 0.439 inches -
Extended Washer Diameter
0.644 inches -
Extended Washer Thickness
0.055 inches -
Grip Diameter
Between 0.4979 inches and 0.4985 inches -
Thread Diameter
0.375 inches -
Grip Length
3.000 inches -
Thready Qty Per Inch (tpi)
24 -
Min. Tensile Strength (psi)
180000 pounds per square inch -
Material
Steel -
Thread Series Designator
Unjf
More from these suppliers
- 5940-01-361-7078 MPN NAS1063D-1-7Terminal Board
- 5940-01-384-3924 MPN NAS1063C5TB177ATerminal Board Marker Strip
- 5305-00-058-9383 MPN MS51977-55Setscrew
- 5305-00-068-5410 MPN MS16995-2Socket Head Cap Screw
- 5305-00-156-2872 MPN 1175-8-7Machine Screw
- 5305-00-197-2388 MPN NAS1101E06-16BMachine Screw
- 5305-00-206-1270 MPN MS35214-11Machine Screw
- 5305-00-242-7251 MPN MS51021-48Setscrew
A high strength, 160,000 pounds per square inch (1100 megapascals) minimum tensile strength externally threaded fastener designed for use in applications involving great shear stress. The head is designed to accommodate an external wrench or driver. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. The unthreaded portion is of specific grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. A locking feature may be incorporated in the design of the head or threads. See bolt, machine and bolt, clevis.
Pricing and Availability
Get a quote for 5306-01-432-6144 shear boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
NAS626H48 | National Aerospace Standards |