NSN 5306-01-433-5437
Coaxial Connector
4.069 inches fastener length, dished hexagon head style, 0.219 inches head height, width between flats: between 0.678 inches and 0.690 inches .
Manufacturer part number NAS6607D54 for national stock number 5306014335437.
Datasheet
-
Product description
Shear Bolt NSN 5306-01-433-5437.
-
MPN or Model
NAS6607D54
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.694 inches -
Fastener Length
4.069 inches -
Head Style
Dished hexagon -
Head Height
0.219 inches -
Width Between Flats
Between 0.678 inches and 0.690 inches -
Grip Diameter
Between 0.435 inches and 0.436 inches -
Thread Diameter
0.437 inches -
Grip Length
3.375 inches -
Thready Qty Per Inch (tpi)
20 -
Min. Tensile Strength (psi)
160000 pounds per square inch -
Material
Steel comp 4340 or steel comp 8740 -
Thread Series Designator
Unjf
More from these suppliers
- 5940-01-451-4407 MPN NAS1063A10-105BVTerminal Board Marker Strip
- 5305-00-007-0287 MPN NAS1131E88PClose Tolerance Screw
- 5305-00-007-6183 MPN NAS1100E04-13PMachine Screw
- 5305-00-079-7969 MPN MS24694S218Machine Screw
- 5305-00-114-1978 MPN NAS664V4HTClose Tolerance Screw
- 5305-00-234-9732 MPN NAS1190C4P8Socket Head Cap Screw
- 5305-00-250-2141 MPN NAS1189-3P16Socket Head Cap Screw
- 5305-00-282-6690 MPN NAS221-37Machine Screw
A high strength, 160,000 pounds per square inch (1100 megapascals) minimum tensile strength externally threaded fastener designed for use in applications involving great shear stress. The head is designed to accommodate an external wrench or driver. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. The unthreaded portion is of specific grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. A locking feature may be incorporated in the design of the head or threads. See bolt, machine and bolt, clevis.
Pricing and Availability
Get a quote for 5306-01-433-5437 shear boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
NAS6607D54 | National Aerospace Standards |
932.35.14.493 | Pilatus Aircraft Ltd |